Mine too
If you’re predominantly a Husky guy think what it would be like if a saw had 372 power but handled like a 550.
That’s college food, for those that paid their own way!
I hope you are correct!! My 572 may sail away. Never owned a Stihl, figured I should give one a try.
The 572 was popular for us to build for awhile. Now we rarely do one. Same is true for the 592.
It spools up fast like a 372 but has a nice wide power band like an 044/440. Best of both worlds really. It won’t balance a long bar as well as a 572 if that’s what you’re hoping for. Other than that I’d much rather run a 400 than a 572. If the 400 can’t cut it I’d rather skip right to a 80/90cc saw but that’s just my personal philosophy of use.
Going to run a 20" lightweight bar on it. Thanks for your input, I will be waiting for saw and bar to arrive.
Congrats! It’ll run a 20 like a boss
462 not so popular anymore either?
Went for months not being able to get them. I steered folks to the 400.....and found that most liked it as well or better.
I heard it was because some parts were made in Ukraine for them....but no way to be sure.
For a while my dealer could only get non m-Tronic 462’s…he was told a similar story about parts from Ukraine
didn’t know you were referring to such but agree, yep, in the vehicle all night up to minus fifteen c and minus 8-10 at 8.30am it is a tight engine(but should be) oil films don’t want to give understandably, but it’s still starts easier than other saws I have, & I won’t even go there with the 660mag, don’t even look at it!
Go a Duralite 24”
if it can’t run that it ain’t worth carrying. 12”/30cc is a good guide for a quality saw. In due respect I run 60cc 20” & 24”and if it can’t be sorted with that I jump straight to 90+ Skip tooth full chisel oregon or carlton let it breath and stay sharp
With it's 28inch Husqvarna "X-Tough" bat & c83 chain.
