McCulloch Super Pro 125c build thread

[Bigmac]

I dunno, I really, REALLY, like a 50" & 125. Thats a pretty sweet working length & balance for a long bar worksaw.

Yes I totally agree! I have been joking with Mike about the 50” bars! Lol

 

[Onan18]

I don’t think a 125 will pull a 50”View attachment 175710View attachment 175711 View attachment 175712

 

[Lee H]

I run a 60 on one with 3/8 chain. Pulls it nice.

 

[Bigmac]

I really like the 5o” on mine, pulls just fine, could even lean on it at times if I wanted to! This wood was right at 48” so almost full bar

 

[Billy Currie]

I found something. It's not locked up, but it has a gaulded piston....needs a bath.

 

[Bigmac]

I found something. It's not locked up, but it has a gaulded piston....needs a bath.

View attachment 175814

Cool! What motor is in it?

 

[Billy Currie]

I thought it was around 90cc's. But my dad said it had a 101. He is a lot sharper on the Mac's than I am.

 

[p61 western]

I thought it was around 90cc's. But my dad said it had a 101. He is a lot sharper on the Mac's than I am.

Dibs lol

 

[Al Smith]

That thing looks like it might be a kart engine stuck inside a 250.I wonder where the oil tank went ?

 

[Al Smith]

As far as will it pull it ,yes .I've ran the same 48" hard nose that' s on the avatar picture using .404 full comp chisel on my 125's which are stock with 8 tooth rims .They don't have any problem with it .
That bar is an odd ball NOS McCulloch most likely made by Windser .It's got a 58 thou slot,hard nose of course .Mike Acres thought it might have been for a gear drive which I've been told the old 1/2" chipper it would have ran back in the day came in.063,.058 and believe it or not in 50 thou .I was just a kid at the very end of the gear drive era so I really would not know .

 

[Steve]

Man, I dont read this thread for 36 hours and i have 5 pages to catch up!

Nice info fellas!

 

[Billy Currie]

That thing looks like it might be a kart engine stuck inside a 250.I wonder where the oil tank went ?

You are correct sir! I remember seeing the oil tank cover off years ago and there wasn't any oil in it that's for sure. I don't think it has ever had a bar and chain mounted to it since the kart engine was installed.

 

[Al Smith]

I don't think you'll be able to get a 250 oil tank on it with that big azz carb sitting straight up it might do it with a sloper manifold if you could find one. Scuffed piston,might buff out might not .

 

[Billy Currie]

I don't think you'll be able to get a 250 oil tank on it with that big azz carb sitting straight up it might do it with a sloper manifold if you could find one. Scuffed piston,might buff out might not .

I don't know how bad the piston is yet, but the big carb is defiantly going to be hard to work around.

 

[cgraham1]

 

[p61 western]

View attachment 176890

Yours?

 

[Bigmac]

View attachment 176890

Get it!! Lol This just sold for $2550

 

[cgraham1]

Yours?

Nope. Not even sure if this is a good deal or not?

Get it!! Lol This just sold for $2550View attachment 176891

If I buy it, it will just be to resell... I don’t really want the headache. Just thought I’d post it here for everyone to see. He sells saws on AS so I know he will usually ship. His username is sawsrusinc

https://www.arboristsite.com/community/members/sawsrusinc.154074/

If he won’t ship I could help out in that department.

 

[Bigmac]

Nope. Not even sure if this is a good deal or not?


If I buy it, it will just be to resell... I don’t really want the headache. Just thought I’d post it here for everyone to see. He sells saws on AS so I know he will usually ship. His username is sawsrusinc

https://www.arboristsite.com/community/members/sawsrusinc.154074/

If he won’t ship I could help out in that department.

I am good, I am only buying ones that fall into my lap! Lol have 3 125’s and a 797. They aren’t worth a ton if they are not proven good runner, parts are getting harder to find so if it’s not complete it can take some time to get the parts! eBay is getting some big money for them right now!

 

[redline4]