Dyno Numbers Only! Comment in the dyno thread

[Red97]

Ported 500i

 

[Red97]

 

[Woodpecker]

Fellas I want to add a friendly reminder here to please keep this thread numbers only and save non #'s comments for the other dyno thread. Frank's a bunch

 

[Red97]

Ported 3120
H jet in the carb
Unlimited coil.

 

[Armbru84]

20cc 2511t 1.58hp
30cc
40cc
50cc mms 5105 5.6hp
60cc mofo 036 7.3 hp
70cc deets 044 hybrid 10.2 hp
80cc 86cc echo hybrid 8.6hp
90cc 661 stroker 12.5hp
100+cc 3120 practice saw 13.4hp


Leader board

Will update as things change

Joe, any changes to leaderboard with all your recent runs? Wasn’t sure if you will maintain this here or in other thread.

 

[Red97]

Joe, any changes to leaderboard with all your recent runs? Wasn’t sure if you will maintain this here or in other thread.

Some changes, but it is difficult to track because of the system change.

 

[jk14]

View attachment 289780

 

[Red97]

 

[jk14]

Nice gains from the 4910.

View attachment 291233
View attachment 291234

 

[jk14]

Here is the 4910 stock/ported vs a stock 261v2View attachment 291339

 

[jk14]

View attachment 291481
View attachment 291482

Not a bad little gain.

 

[huskihl]

 

[Red97]

Some 2511t before/after.

 

[farminkarman]

Jonsered 2165 setup for work/4 cube play (390 boot + RWJ carb)

 

[farminkarman]

Stihl MS362 that I repaired & ported:

 

[farminkarman]

Stihl 064 ported by @srcarr52

 

[J.Noss]

Husqvarna 550xp mk2 ported my Joe at HMWF I'm very happy with his work

 

[J.Noss]

And here's my Husqvarna 572xp ported by Joe at HMWF LLC again, very happy and significant dyno improvement

 

[farminkarman]

Husqvarna 55 open port. Cut squish, raised & widened exhaust, raised upper transfers, widened & lowered intake, timing advance, and muffler mod. Not bad for an open port 55.

 

[farminkarman]

Clone 372 I ported for a longer bar (102 exhaust). I didn’t know the buyer was gonna have it dynoed.