Brewz
Free Range Human in a Tax Farm
- Local time
- 5:12 AM
- User ID
- 550
- Joined
- Jan 16, 2016
- Messages
- 4,217
- Reaction score
- 14,321
- Location
- Hunter Valley - Australia

I dont have a lathe. I will be getting a friend who has a lathe to do the work and he is a very busy man running a business.
I would love to have time to make a PCV rod, but I cant see it happening at this stage.
I forgot to add that I plan to measure the port timings and post them up for advice on exactly how much to cut. I have a drill chuck in the mail to set up my degree wheel.
I started off planning for a lower compression saw but I plan to keep my red light as a 160 psi saw for general work.
I would like to see this one up around 220, set up for torque for running longer bars
Transfers can be raised, I have grinding stuff
I would love to have time to make a PCV rod, but I cant see it happening at this stage.
I forgot to add that I plan to measure the port timings and post them up for advice on exactly how much to cut. I have a drill chuck in the mail to set up my degree wheel.
I started off planning for a lower compression saw but I plan to keep my red light as a 160 psi saw for general work.
I would like to see this one up around 220, set up for torque for running longer bars
Transfers can be raised, I have grinding stuff