- Local time
- 2:51 AM
- User ID
- 1377
- Joined
- Jun 5, 2016
- Messages
- 31,111
- Reaction score
- 194,402
- Location
- Northwoods of Wisconsin
041?
I have two myself, lol...
More than just those two. lol Guess I shoulda mentioned the saw was worn out to. Poorly taken care of and just a ton of small stuff wrong.retire the saw because it needs a fuel line and the kit properly installed?
fuel line is still available through stihl and the carb kit is availble through rotary or stens.
That will be for cutting curved lines !!View attachment 41145
25° on the right hand cutters and 30° on the left hand ones?
Some people just don't have it man.So finally got all parts and time to finish up the 281/288 for a guy. Recap: he ruined p/c using piston screwdriver for piston stop. Replaced that with ks p/c. Then i found he had taken top off carb and didnt line up dowel and forced it on. Mushroomed the dowel. Now I am installing b/c and find the clutch is turning the sprocket full time but doesnt look engaged. The bell is not seated into the oil drive gear so the clutch is bottoming out!!
Thats 3 for 3. Everything he touched he has messed up.
View attachment 42153
And never will.Some people just don't have it man.
When I was framing houses I could tell in about 15 minutes if a guy was worth keeping around.