Stihl 046/460 D Jug. Are there benefits using it on a 460, or better using it on a Hybrid?

[Brewz]

Maybe try 102/122/78.
Everyone likes different recipes with the hybrids. All a matter of porting style IMO. I like to keep my intake and exhaust durations close to equal and at least 20* of blowdown. .025-.030 off the FW key and a nice open muffler.

Those are my favorite numbers in 044/046/064 etc with about 180 comp.
Strong across the range in our nasty timber.

And an HD-11 carb!!!

Going to try and fit a WJ10A on mine.
The WJ6A on my 044 really gets it hauling hard

 

[MustangMike]

Tony, I know the WD-11 is the 044 Arctic carb, which has a richer jet, what are the 10A and 6A carbs?

Also, the HD-50 (461) carb worked very well on one of my ported 460s, but the other saws don't like it as much!

 

[mdavlee]

Tony, I know the WD-11 is the 044 Arctic carb, which has a richer jet, what are the 10A and 6A carbs?

Also, the HD-50 (461) carb worked very well on one of my ported 460s, but the other saws don't like it as much!

064 and 066 carbs

 

[MustangMike]

Do they flow more or are they jetted richer? It always amazes me that a 660 intake does not look any larger than a 440 intake.

 

[mdavlee]

Jetted richer on L and extra bleed holes. 660 boot at the tank is smaller.

 

[MustangMike]

So an HD-11 carb may provide a similar benefit?

 

[mdavlee]

So an HD-11 carb may provide a similar benefit?

Possibly.

 

[TreeLife]

Thread revival!!! Anyone playin with any...D jugs?

 

[JonCraig]

Still love my 046 w/ “good numbers” D-jug. Very noticeably stronger than any of the 3 MS460’s I’ve had.

All OEM except a Meteor piston & gasket delete. Oh, and HO Oiler.

 

[MustangMike]

I've heard several builders say they would prefer not to use D jugs, but the two 77 cc saw I kept (Hybrid + 460, both ported) have D jugs on em.

 

[Deets066]

I've done a few, certain builds I'll take a hemi. Others I'll take a D

 

[TreeLife]

I've done a few, certain builds I'll take a hemi. Others I'll take a D

Deets, if you were going to do a strong short bar saw for play...your choice?

 

[Deets066]

Deets, if you were going to do a strong short bar saw for play...your choice?

Depends on what piston I was gunna use.
If stock 46 piston then I'll take the D.
Few other piston options I'll take the hemi

 

[Deets066]

Deets, if you were going to do a strong short bar saw for play...your choice?

D jug in my hybrid. I'm on the right

 

[TreeLife]

Zippy!!

 

[Deets066]

Tiz

 

[Moparmyway]

And now, the unicorn 52mm 1128 cylinder that nobody has spoken about

 

[Aciera]

Which is really only 43 cal, but not as bad as a 38 which is .35!

And in the first movie he used a 41 mag.

 

[Deets066]

And now, the unicorn 52mm 1128 cylinder that nobody has spoken about

View attachment 124744
View attachment 124745

Whatcha gunna do wif dat?

 

[RI Chevy]

Is that a 064?

And now, the unicorn 52mm 1128 cylinder that nobody has spoken about

View attachment 124744
View attachment 124745