Play time?

[Red97]

And you still won't make me falling spikes.

I can try, but my table dont do as nice as the stamped/laser ones you are used to..

I have three am 288 kits

Hmm. Have to see where those stack up size wise, never messed with 2 series stuff. Intake block might add to the complication.

 

[Red97]

Bolt pattern is the same as the 046/460

With the stroke difference, I need to shave a good bit off the base just to set squish. I think I can make the big bore 066 work.... lose the top 2 fins basically.
How well will it cool? Idk yet...

 

[huskihl]

Some of the 066 cylinders had a thick base and some had a much thinner one. A thicker base and shorter piston might come in handy here for you

 

[Red97]

Some of the 066 cylinders had a thick base and some had a much thinner one. A thicker base and shorter piston might come in handy here for you

About .100 thicker than my welded base jug.

 

[Red97]

About .100 thicker than my welded base jug.

That casting line is about the thickness of the 460 jugs I have here. They added that block to the bottom, longer stroke and skirt...

 

[Red97]

@titanman6100
Hooked me up with the 660 jug.

Thank you sir.

 

[Stump Shot]

046 and a 660 cylinder reporting for duty Joe @Red97

 

[titanman6100]

Get it running good so i can come run it

 

[mgr1]

Looking forward what you gonna make this time.
Is it possible to ad the bolt patern measurements?

 

[Red97]

046 and a 660 cylinder reporting for duty Joe @Red97

View attachment 230470

Thank you Steve.

Looking forward what you gonna make this time.
Is it possible to ad the bolt patern measurements?

I'll measure when I get back home.

 

[Czed]

I can try, but my table dont do as nice as the stamped/laser ones you are used to..



Hmm. Have to see where those stack up size wise, never messed with 2 series stuff. Intake block might add to the complication.

Buy a 288

 

[Czed]

046 and a 660 cylinder reporting for duty Joe @Red97

View attachment 230470

What's a 288 cylinder look like next to a 660?

 

[Red97]

Ought to seal now...

 

[Stump Shot]

What's a 288 cylinder look like next to a 660?

 

[Pincher]

Here is a 460 on the left and a 660 china kit on right. 460 measures 50X55.5mm and 660 measures 50X55.

 

[Red97]

Looking forward what you gonna make this time.
Is it possible to ad the bolt patern measurements?

The echo is approx 1.980"x1.980"

 

[Pincher]

The echo is approx 1.980"x1.980"

That would be 50X50. Inch to metric conversion 1.980x25.4=50.292

 

[Red97]

May or may not pop those through the new sleeve...

 

[Red97]

View attachment 230616 View attachment 230617

May or may not pop those through the new sleeve...

Have a bit more welding to go anyway...

 

[Pincher]

View attachment 230617

May or may not pop those through the new sleeve...[/QUOTE]

That looks fragile. Not much cast iron holding above the intake. Your effort impresses the crap out of me!