592XP info and a surprise

[kneedeepinsaws]

Here’s a few more pictures I forgot to include in my earlier post on page 40. I still don’t have the saw back. I do expect it in a week or so.
View attachment 305182 View attachment 305183 View attachment 305184 View attachment 305185

They are using dowels for the cylinder for a change! The muffler is actually 3 bolts!

can you explain how the auto choke works???

 

[Evansaw]

Just the new era Tsumura with Husqvarna painting
Nothing to write home about. Rather disappointment

Husqvarna once again made clear they can't build a bar and the saw is a copy paste of the 462 in terms of timing advance.

This was the video I wasn't impressed with. Look a saw will gain power right through the rpm range when bottom end loosens up and a good ring seal is established so these videos may not represent the saw well. But still I'm not impressed with what I've seen. I'd love to see more videos of saws with more run time. Also the 'new' Sugi/Tsumura reduced weight bars are a bit of a disapointment. They are NOT new designs, the grey section is just PAINT over the usual oval cutouts that the Jap lights bars have always had. I was under the impression that whole grey area was steel removed like the old Oregon lights. But they are just regular bars that have been out forward years with a paint job.

 

[Nutball]

What about their new laminated bars which appear to be similar to Stihl quality?

 

[Intoxsawcated]

Here’s a few more pictures I forgot to include in my earlier post on page 40. I still don’t have the saw back. I do expect it in a week or so.
View attachment 305182 View attachment 305183 View attachment 305184 View attachment 305185

Ooh la la

Sent from my SM-S767VL using Tapatalk

 

[kneedeepinsaws]

@Spike60

When do you expect to see a demo? I remember you got the 572 quite early so hopefully the same kinda deal with 592?

 

[Spike60]

@Spike60

When do you expect to see a demo? I remember you got the 572 quite early so hopefully the same kinda deal with 592?

I had them over a year ago; couple of pre-production units for field testing. Gave them to some loggers. After they put 100+ tanks through them they went back for tear down/evaluation. They were both XPG models, so they were nice in the winter. It's fun to be in the test program like that, but there's one huge negative about it: Ya gotta send 'em back.

 

[Bugaboots]

Doing some IPL surfing between the 585 and 592XP all the # are the same on the intake setup so we should be able to swap between a AT and standard carb. Just going to have a difference in the cover w/ holes for the carb adjustment.

Kind of funny the AT carb is actually cheaper than the standard carb.

Looks like the Coils may be different, different part#

 

[species8472]

Might be a stupid question. Can anyone get hold of one yet?

 

[DC1072]

Doing some IPL surfing between the 585 and 592XP all the # are the same on the intake setup so we should be able to swap between a AT and standard carb. Just going to have a difference in the cover w/ holes for the carb adjustment.

Kind of funny the AT carb is actually cheaper than the standard carb.

Looks like the Coils may be different, different part#

It seems like everybody else can except for here in the US. Maybe I’m wrong
Two new videos are posted on YouTube maybe about three hours ago

 

[andyshine77]

 

[Ketchup]

Roughly 6 seconds faster? Nice.

What about long bar?

 

[DC1072]

He just put up another one but it up against the 500 I

 

[Ketchup]

That’s cool but 661 and 395 are the real questions. 592 should be well ahead of 500i and 390.

 

[cuinrearview]

That’s cool but 661 and 395 are the real questions. 592 should be well ahead of 500i and 390.

With a bar that length I would expect it to be ahead of a 395 with normal chain. Take it out to 36+ and see where the chips fall.

 

[andyshine77]

Yeah his videos aren't the best compassion, but it's better than nothing. The dude is in Hungary. I may have to get in touch with my cousin there and see if he can track one down.

 

[RI Chevy]

Testing with the saws needs to be done with same bar, chain, and wood.

 

[DC1072]

Yeah hid videos aren't the best compassion, but it's better than nothing. The dude is in Hungary. I may have to get in touch with my cousin there and see if he can track one down.

I agree

 

[DC1072]

I’ve seen a couple of his guys videos he has a tendency to run long bars so hopefully he’s listening and we get to see some long bar action

 

[RI Chevy]

From what I see so far, this 592 seems very promising!

 

[Maintenance Chief]

From what I see so far, this 592 seems very promising!

Oohh I like the lighthouse.