Who's running 592s and 585s?

[Catman]

I’m almost positive he runs a 572

He used to run the 390, but yes the new saw is a 572.

 

[Normzilla]

I’m almost positive he runs a 572

Cool thank u

 

[DC1072]

I don't know how long I'll be able to use my MDG1. Version 2.0 is out and it is only accessible through the dealer portal. It is my understanding that it will need a dealer log in to use. I'm trying to get an answers if the version I have will continue to be supported. As for having the Auto Tune CST It's one of the reasons I still work two days a week at the tree service. They are a Husky dealer.

This falls under the Right to Repair lawsuits I think. It's such a small market in the grand scheme of things, I don't see it getting any traction.

It was great today I got my Saw back from the shop the firmware update must have worked. I got my Saw to fire up on the first pull.
Thank you red light

 

[redlight066]

It was great today I got my Saw back from the shop the firmware update must have worked. I got my Saw to fire up on the first pull.
Thank you red light

I had a good time hanging out and talking saws. Glad she's Jam up and Jelly tight. Thanks!

 

[DC1072]

I had a good time hanging out and talking saws. Glad she's Jam up and Jelly tight. Thanks!

Oh yeah I forgot to mention the 460. Run a 32 inch bar like a champ
Great job on the rebuild

 

[DC1072]

I back to the 592 has anybody heard of any issues with starting yesterday I went out to start and I pull and pull and pull. I eventually move the spark plug and I put heat do it and eventually it started on two pulls
This is not an every day thing that goes on because the other day it fired up on the first pull .
My downfall is I didn’t stare at the spark plug long enough to see if it was wet or what .

 

[Woodwater]

lol.. you know what you have write here?

 

[Woodwater]

I'm back to 7 pin on the 572. that thing have so much torqe in hard wood.

 

[Squareground3691]

I back to the 592 has anybody heard of any issues with starting yesterday I went out to start and I pull and pull and pull. I eventually move the spark plug and I put heat do it and eventually it started on two pulls
This is not an every day thing that goes on because the other day it fired up on the first pull .
My downfall is I didn’t stare at the spark plug long enough to see if it was wet or what .

Haven’t had any issues starting usually fires on third pull with cold start.

 

[DC1072]

today it started on the third pull
Bad picture of a spark plug did not realize I had a shadow from yesterday little black Build up on it

 

[DC1072]

lol.. you know what you have write here?

I’m not sure what you mean can you please explain.
?

 

[DC1072]

I'm back to 7 pin on the 572. that thing have so much torqe in hard wood.

I do have a 572 that’s getting worked over.

 

[DC1072]

Haven’t had any issues starting usually fires on third pull with cold start.

I did see somebody’s quote on the YouTube in the comments. That they may be having some issues that sounds almost exactly like mine maybe. But that’s good that you’re not have any issues with yours

 

[Squareground3691]

I did see somebody’s quote on the YouTube in the comments. That they may be having some issues that sounds almost exactly like mine maybe. But that’s good that you’re not have any issues with yours

Yea did hear that some people are having issues, I don’t run it every day thoe .

 

[DC1072]

So after today I got it started. It usually has no issues after it’s warm. I went out cut some wood with it got it hot. I had to go and talk to my wife may be for a half hour come back out so stop touching warm had to pull it like 15 times to get it to kick over.

 

[DC1072]

Yea did hear that some people are having issues, I don’t run it every day thoe .

I do not run mine every day I just got it back from the firmware update usually if I’m lucky once a week. I got it in brand new when I first came out I think I had a five hours on it.

 

[Squareground3691]

So after today I got it started. It usually has no issues after it’s warm. I went out cut some wood with it got it hot. I had to go and talk to my wife may be for a half hour come back out so stop touching warm had to pull it like 15 times to get it to kick over.

Wondering if it’s a coil issue ,or firmware

I do not run mine every day I just got it back from the firmware update usually if I’m lucky once a week. I got it in brand new when I first came out I think I had a five hours on it.

 

[Squareground3691]

Wondering if it’s a coil issue ,or firmware

My 394 had issues starting again after long hot use had to change coil but thats a way different saw .

 

[DC1072]

My 394 had issues starting again after long hot use had to change coil but thats a way different saw .

Most of the time the issue starting is when it’s cold this is the first time I had the issue when it was hot.
Interesting thing is I just ran it again got it real hot remove the spark plug spark plug had more of a brown color to it which is good then black.

 

[Duce]

If it's new. Take saw to dealer, ask them to repair, replace or trade it in. You need a different or repaired saw. Every brand has that saw being a dud, same with anything mechanical, cars, trucks, appliances and tools.