What's on your bench?

[huskihl]

Guess whos wife is away today

View attachment 278406






Steven

Nice buck

 

[stihl_head1982]

Scuzzy 026 but nice guts

View attachment 278453 View attachment 278454 View attachment 278455

Might be surprised how it will look once its been gone over.

 

[Stevetheboatguy]

Wer gonna need more pics of that buck Steve! And maybe a deer story or 2

My pops is the story. Man knows deer better than anyone bar none. I'm just a trigger man. He told me where to be and when. Even told me to use his muzzle loader cuz it was going to be a 200yd shot. And well the only thing he missed was I was patient enough to let it get in to 175.

Man needs his own hunting show........

A few from this year and past.






Steven

 

[Stevetheboatguy]

Nice buck

Thank you Sir.



Steven

 

[JohnnyBlade]

My pops is the story. Man knows deer better than anyone bar none. I'm just a trigger man. He told me where to be and when. Even told me to use his muzzle loader cuz it was going to be a 200yd shot. And well the only thing he missed was I was patient enough to let it get in to 175.

Man needs his own hunting show........

A few from this year and past.


View attachment 278464 View attachment 278465 View attachment 278466 View attachment 278467



Steven

Hell YES! Very nice trophy room! Good story too! If he gets that TV show tell him i work cheap oh and wer gonna need some hot chicks in camo on the set at all times.... To boost ratings of course

 

[tickbitintn]

Anyone know what make of chain this is?

I am not familiar with it.

Sent from my XT1635-01 using Tapatalk

 

[Billy Currie]

Anyone know what make of chain this is?

I am not familiar with it.

Sent from my XT1635-01 using Tapatalk

Looks like an old McCulloch chain.....well, on the later model saws.

 

[Stevetheboatguy]

Hell YES! Very nice trophy room! Good story too! If he gets that TV show tell him i work cheap oh and wer gonna need some hot chicks in camo on the set at all times.... To boost ratings of course

That's my dads living room. Lot's of good stories and memories hanging on those walls.



Steven

 

[PA Dan]

My pops is the story. Man knows deer better than anyone bar none. I'm just a trigger man. He told me where to be and when. Even told me to use his muzzle loader cuz it was going to be a 200yd shot. And well the only thing he missed was I was patient enough to let it get in to 175.

Man needs his own hunting show........

A few from this year and past.


View attachment 278464 View attachment 278465 View attachment 278466 View attachment 278467



Steven

Wow those are some pigs!

 

[Definitive Dave]

My bench is totally clear BUT.....my "To Do Immediately" auxiliary bench is a little overburdened right now.

Top Row: poulan pro 475 and 3x 084 that I was intending to assess from top to bottom on video by request from a few guys who wanted to know how to figure value on parts and runner saws when buying for flipping.
Center Area: 394 race saw and spare race recoil that need re-strung, a borrowed Dolmar 166 cylinder and new LH Wiseco 166 piston kit to study for developing a performance model (race , my Mofo 026 that needs the recoil re-installed after I stole it last season to use as a spare for my nitro 026 racer.
Bottom Row: NOS 101B motor, runner parts donor 795, two unknown 125cc mac motors and pistons, bin full of dave's hoard of OEM badges, etc. that needs sorted, a nice roller bar and replacement tip for small husky racing (346xp), pile of good large size chains that need measured and tagged for gauge, pitch, brand and DL, two used cylinders to be stripped of screws/decomps before sorting for boring.

Maybe I will get a little bit of this done this week
Dave

 

[jacob j.]

My bench is totally clear BUT.....my "To Do Immediately" auxiliary bench is a little overburdened right now.
View attachment 278594
Top Row: poulan pro 475 and 3x 084 that I was intending to assess from top to bottom on video by request from a few guys who wanted to know how to figure value on parts and runner saws when buying for flipping.
Center Area: 394 race saw and spare race recoil that need re-strung, a borrowed Dolmar 166 cylinder and new LH Wiseco 166 piston kit to study for developing a performance model (race , my Mofo 026 that needs the recoil re-installed after I stole it last season to use as a spare for my nitro 026 racer.
Bottom Row: NOS 101B motor, runner parts donor 795, two unknown 125cc mac motors and pistons, bin full of dave's hoard of OEM badges, etc. that needs sorted, a nice roller bar and replacement tip for small husky racing (346xp), pile of good large size chains that need measured and tagged for gauge, pitch, brand and DL, two used cylinders to be stripped of screws/decomps before sorting for boring.

Maybe I will get a little bit of this done this week
Dave

That's a pretty good looking workload there, Mr. DD. Let me know if you need slugs for those 125s, I have extras. I'll be fixing up a box of scored jugs for you next weekend.

 

[Definitive Dave]

That's a pretty good looking workload there, Mr. DD. Let me know if you need slugs for those 125s, I have extras. I'll be fixing up a box of scored jugs for you next weekend.

I always seem to find projects in any direction I look
I am not sure if the slugs I have will clean up enough for modelling or not. The 101B has a piston but I think I need several different ones to get what I am looking for made.
I need to re-read the thread you did about them again.
Lots to learn about these magical beasts.

 

[jacob j.]

I always seem to find projects in any direction I look
I am not sure if the slugs I have will clean up enough for modelling or not. The 101B has a piston but I think I need several different ones to get what I am looking for made.
I need to re-read the thread you did about them again.
Lots to learn about these magical beasts.

It's pretty amazing what McCulloch did and the level of engineering they put into their motors. I'll set you up with several slugs.

I'm going through a couple 101 saws for members here now, lots to report on.

 

[WillG]

This sorry piece of garbage. Dad's cousin gave it to me to do whatever I want with it. Piston isn't scored and it ran on mix down the carb. Ordered a $15 aftermarket carb and gaskets. I'll fix the recoil, new carb, fuel lines, purge bulb, fuel filter, plug and flip it to make a couple bucks.

Sent from my E6910 using Tapatalk

 

[czar800]

Guy dropped off a will not run 038.

 

[tickbitintn]

This sorry piece of garbage. Dad's cousin gave it to me to do whatever I want with it. Piston isn't scored and it ran on mix down the carb. Ordered a $15 aftermarket carb and gaskets. I'll fix the recoil, new carb, fuel lines, purge bulb, fuel filter, plug and flip it to make a couple bucks.

Sent from my E6910 using Tapatalk

Basically a yellow homelice?

Sent from my XT1635-01 using Tapatalk

 

[WillG]

Basically a yellow homelice?

Sent from my XT1635-01 using Tapatalk

Yup.

Sent from my E6910 using Tapatalk

 

[tickbitintn]

Yup.

Sent from my E6910 using Tapatalk

Hope you don't have to spend too much time on it.
Last POS of those I worked on got abandoned and I couldn't even recoup the parts bill on it.
Wishing you the best of luck on that one sir!

 

[WillG]

With the exception of the carb and gaskets I have everything in stock. So the $15 for the carb isn't bad.

Sent from my E6910 using Tapatalk

 

[tickbitintn]

With the exception of the carb and gaskets I have everything in stock. So the $15 for the carb isn't bad.

Sent from my E6910 using Tapatalk

Fuel filter, lines, bulb, carb kit, air filter, spark plug and a new chain....
Lost money when I took $40 for it, my time and cleaning up the mess it left was a lesson to never touch another one.

Sent from my XT1635-01 using Tapatalk