So what did you do today?

[Canadian farm boy]

I'm a slacker sometimes

 

[jake wells]

im burning #8 stove coal. hell of a lot warmer than wood.

 

[Big_6]

Bought a Prince 20 ton, 32" ram, 9hp briggs Log splitter
Carb issues, leaking hydro. Hose connection.
Runs and splits! But slow...
@ How do you speed up the ram?
Pump / idle speed?
*(processor plans underway!
*4 way wings,
'owl approved',
* table,
*an extension/receiver
off the back to spin
this situation around. The splits will be on the back then!

 

[merc_man]

I went thru a couple of coils trying to fix one of those engines, pretty common bad coil, last one I had it would start cold,, then as it warmed *s-word would start happening,, new used coil was the answer,, it had me stumped for a bit, though it was the carby as it sat for a long while outside.
Keep us posted.
BBB

I got that snowblower working this after noon. Its missing a gasket between the carb and the manifold. It idled good with choke on a bit and after half throttle ran with choke off. Sure it will run fine once i get a manifold gasket for it.

Sent from my SM-J320W8 using Tapatalk

 

[exSW]

Fed the cows,other than that:

 

[huskihl]

Hey mike, shes pretty beat up, but this little fella is already a lot better sleeper than our other son. He slept almost continuously from 4 am until 9!! So mom amd i are both feeling considerably fresher than yesterday

Congrats Custer. Glad everything went smoothly for you and the Mrs

 

[bigbadbob]

Spent the day taking apart a high hour 066, I did have it running, was very noisy found a bad clutch spring, fixed that also it wont idle down, so I have separated the tank and engine will do a pressure and vac on it, it is very filthy so will clean it up.
The saw I am working on is on the right and the other is scored lightly,,
I was lucky enough to find a hand full of new oem 066 pistons with rings for cheap. Have 3 or 4 066 to fix, also went for a hill hike and changed the carb on my 064.
BBB

 

[Cut4fun]

Hunted all day and watched deer. Nice when you get paid to watch deer.

 

[beaglebriar]

Bought a Prince 20 ton, 32" ram, 9hp briggs Log splitter
Carb issues, leaking hydro. Hose connection.
Runs and splits! But slow...
@ How do you speed up the ram?
Pump / idle speed?
*(processor plans underway!
*4 way wings, 'owl approved',
* table,
*an extension receiver
off the back to spin
this situation around. The splits will be on the back then!

See if you can find any info on the pump. Should tell how many GPM. You might have to go to a bigger pump to decrease cycle time.

 

[Guido Salvage]

Spent almost 9 hours in the car making the return trip from Kentucky after taking less than 7.5 hours to get there.

 

[Big_6]

See if you can find any info on the pump. Should tell how many GPM. You might have to go to a bigger pump to decrease cycle time.

Williams pump, Prince
2500 psi cyl., max. 24" log
Bad #1 hose by ram on cylinder, leaking and decayed rubber. Hydraulic fluid tank leaks through the top cap, no threads to fasten it.

 

[Daserlon]

Didnt do nothin today, finally!

 

[zeebee413]

About to heat the barrel up on the ole Browning BLR 450 marlin.... yep it's overkill for deer, but they don't run ... its gun season in Ohio!

 

[bikemike]

Made coffee and hope to find a Lil cash gig to make up for the day off

 

[Big_6]

Hunting !
No backyard deer, just front yard deer at camp.

 

[Czed]

Tried out a ruger match champion .357 excellent shooter great trigger and if anyone is near a rural king 4.99 per gallon of bar and chain oil and they have 12 percent off everything for a few more days.

 

[dall]

czed where in wv are you again i forgot

 

[Czed]

Ripley 20 miles north of Charleston.

 

[dall]

cool im 20 miles south of morgantown and 20 miles east of clarksburg

 

[merc_man]

Got home from work and fixed my f- up i did on sunday.

Thats what happens when ya have too many things to do and not enough time. And if your wondering what its off of. Its off the brand new rv we got back in the summer.

I cut out most the bent section ( about an inch)and straightened up the edges and welded in a peice of round tubing to reinforce it.

Sent from my SM-J320W8 using Tapatalk