MMWS/CROSS PERFORMANCE MS661 TOP END

[srcarr52]

You would damn sure be the guy for the job. The exhaust flange would need to be about stock in size though. Needs to be a bolt on sorta deal....,

That's not much fun but I could do that. It would be nice to add a little extra material to make things easier for excessive mods.

 

[Gentleman]

Let me talk to Bruce to be sure he doesn't need them back. If not, you are first in line.

I don't need them.

 

[Redbull661]

Sooo is the video done yet? is it done yet? is it done yet?!?!?

If you are interested in unloading one, I'll take it

"That's what she said"

 

[Glock37]

Ill be getting one once they get on hlsuppy


Sent from my iPhone using Tapatalk

 

[Gentleman]

So when is the 395, 372 & 346 jugz coming?

372 would be a good one to do. 395 we don't sell very many of and 346 OEM price is low now.

 

[Gentleman]

@Mastermind I see the 40:1 stickers. Do we need to recommend that mix with the cylinders?

 

[CR888]

We all think Randy is pretty good cause he feeds our saw wants and makes sporty jugs for us and stuff but Bruce is on the good list too for doing all the stuff he does too.

 

[Mastermind]

372 would be a good one to do. 395 we don't sell very many of and 346 OEM price is low now.

We need to make a kit to turn the 372 xtorq into a old school 372XP. With some improvements of course.

 

[Mastermind]

@Mastermind I see the 40:1 stickers. Do we need to recommend that mix with the cylinders?

Yes, I think that would be a good idea.

 

[Mastermind]

We all think Randy is pretty good cause he feeds our saw wants and makes sporty jugs for us and stuff but Bruce is on the good list too for doing all the stuff he does too.

We have Bruce to thank for this site.....

 

[Sty57]

Now if someone would come out with a good replacement 2100 piston............hint hint

 

[Sty57]

Now if someone would come out with a good replacement 2100 piston............hint hint

Oh and a Poulan 5200 piston too.....

 

[treesmith]

Fantastic work! This place gets better

Sent from my SM-G900I using Tapatalk

 

[Simondo]

Could i suggest decent 242xp..254xp..top ends ...There should be a demand for proper well made pistons and cylinders. Just a thought to file away .

 

[RI Chevy]

Once this new cylinder is broke in, send the saw to the CGT and we could put it on the saw dyno and get some numbers.

 

[paragonbuilder]

Once this new cylinder is broke in, send the saw to the CGT and we could put it on the saw dyno and get some numbers.

Dyno's are overrated...[emoji12]


Sent from my iPhone using Tapatalk

 

[Gentleman]

We need to make a kit to turn the 372 xtorq into a old school 372XP. With some improvements of course.

It that possible?

 

[Stump Shot]

372 would be a good one to do. 395 we don't sell very many of and 346 OEM price is low now.

While the 372 is an excellent and obvious choice, I might say as far as old saws go, besides the aforementioned, I see a lot of MS360/440's and 272's in my neck of the woods, might be worth while on your to do list possibly.

 

[jmssaws]

I'll be making some videos on a little while Bruce. Its a bit damp out just yet.....

These jugs both look really good. The intake port is a little crooked in one, but overall the quality is impressive. The bevels are very well done.....

The worst intake port I've laid eyes on was in a very good running ks 064 cylinder.
It's so misshapen it makes me giggle.

I'll look for it and post a pic.

I did a thread on stock 064 cylinders,I timed and ran a mahle,ks and a 100$ am
All on the same saw and the am looked better and ran better than the oem.
I ported it and put it on Jchin's saw.
Ran pretty good ported also

 

[srcarr52]

Now if someone would come out with a good replacement 2100 piston............hint hint

I'd like a 394 length piston with the locating pins location of the 395. This way they could make a 394 and 395 piston with the same casting. Then I'd just make something of the same design for a direct replacement 2100 piston, it would gain a lot of performance with just a piston swap.