High Quality Chainsaw Bars Husqvarna Toys

Let's Talk Sealants

Nutball

Here For The Long Haul!
Local time
8:07 AM
User ID
7732
Joined
Oct 31, 2018
Messages
4,038
Reaction score
11,009
Location
Mt. Juliet, TN
Country flag
Just don't use this stuff, heat and gas melt it.
DSC02312 (800x330).jpg

Would 1184 be good for sealing around this tank stopper? I just found out today the tank was bone dry because it suddenly started leaking badly since the last time it was used. I might get a new stopper and seal it in with liquid gasket.
DSC02308 (1024x768).jpg
 

dmb2613

Super OPE Member
GoldMember
Local time
9:07 AM
User ID
6142
Joined
May 13, 2018
Messages
325
Reaction score
655
Location
Randolph Virginia
Country flag
I went to school at Central Carolina Tech from 80 - 82. At that time 3M weather stripping adhesive was used a lot on gaskets as a dressing.

I've not thought about that in years. I wonder if it's fuel resistant?

In the 70s I used it to hold the trim on new Chevrolets, as well as holding valve cover gaskets on until you got them in place for the bolts. Nascar pit crews still use it to hold the lugs on the rims for those fast pit stops. And I still use it as well as Indian head gasket shellac at work, the other mechanics say I am nuts for using it still. But I have no leaks and I give them hell when they have to do a job over
 

lehman live edge slab

Live Action
Local time
8:07 AM
User ID
3953
Joined
Sep 2, 2017
Messages
3,373
Reaction score
11,666
Location
Mn
Country flag
I like the motoseal personally I think it’s easy to work with myself.
 

Al Smith

Here For The Long Haul!
Local time
9:07 AM
User ID
537
Joined
Jan 14, 2016
Messages
6,095
Reaction score
13,457
Location
North western Ohio
Country flag
It would seem to me if Permatex worked on 1950 Chevys it should work today .You don't use that stuff on head gaskets of course ,that would really be silly .If you felt the need,which I don't for case gaskets or base gaskets it would work .It's gasoline resistant unless they've changed the formulation which I doubt .It isn't alcohol resistant .So if the percentage of ethanol affects it or not I have no idea only to say it's never failed me .
 

stihl_head1982

Here long time
Local time
9:07 AM
User ID
168
Joined
Dec 24, 2015
Messages
4,152
Reaction score
14,536
Location
USA
Country flag
I've used a crap load of the old stuff on plenty of clam shells (at least when I first began working on saws).
I must say that I never had a failure due to sealant on any saw.
 

Larry B

Pinnacle OPE Member
Local time
9:07 AM
User ID
3952
Joined
Sep 2, 2017
Messages
619
Reaction score
1,806
Location
SW ohio
Country flag
Anything exposed to fuel i use three bond. For everthing else i use The Right Stuff. I have a box of sealants and have settled on these two as the best for me.
 

Al Smith

Here For The Long Haul!
Local time
9:07 AM
User ID
537
Joined
Jan 14, 2016
Messages
6,095
Reaction score
13,457
Location
North western Ohio
Country flag
I think in this rather long subject discussion the fruit basket got mixed up. The apples got mixed up with the oranges .Sealants with regards to gaskets are not the same thing as those used to repair a leaky gas tank .
 

stihl_head1982

Here long time
Local time
9:07 AM
User ID
168
Joined
Dec 24, 2015
Messages
4,152
Reaction score
14,536
Location
USA
Country flag
turtles are kewl.
wax is good even on the table saw.
 

Al Smith

Here For The Long Haul!
Local time
9:07 AM
User ID
537
Joined
Jan 14, 2016
Messages
6,095
Reaction score
13,457
Location
North western Ohio
Country flag
Ah yes ,cast iron table top .Johnsons paste wax works well .Of course that's old school like Permatex but it should still work well .Permatex would not work well on a table saw top .
 

Bilge Rat

Here For The Long Haul!
GoldMember
Local time
9:07 AM
User ID
743
Joined
Jan 31, 2016
Messages
1,046
Reaction score
5,726
Location
savannah georgia
Country flag
Don't be stealing the watercolor brushes or my crayons either.
HF has flux brushes that work. Bend a brush brushes are smaller and work well too, they come in a box of about 50.

We have gopher tortoises around here. They get big like 100lbs. Live in burrows in sandy areas. They will let rattlesnakes live with them in the burrow.
 

Al Smith

Here For The Long Haul!
Local time
9:07 AM
User ID
537
Joined
Jan 14, 2016
Messages
6,095
Reaction score
13,457
Location
North western Ohio
Country flag
The first time I even heard of gopher turtles or fact saw them was near Sebring Fla a few years back .Those things can fling dirt about as fast as a ground hog .Then on the other hand Florida has a lot of strange things or at least seem strange in the eyes of an Ohio country bumkin .
 

Leafy

Super OPE Member
Local time
9:07 AM
User ID
6062
Joined
May 3, 2018
Messages
356
Reaction score
647
Location
NH
Country flag
Is permatex the right stuff the same as Hondabond?
 

MACHINE

Pinnacle OPE Member
Local time
9:07 AM
User ID
10069
Joined
Jul 29, 2019
Messages
1,070
Reaction score
4,957
Location
Broken Bow, Oklahoma
Country flag
Copper coat works great,
Use it for head gaskets,
Really tough

Sent from my SM-G930F using Tapatalk
 

gaztric

Well-Known OPE Member
Local time
12:07 AM
User ID
14282
Joined
Oct 23, 2020
Messages
10
Reaction score
32
Location
aus
Country flag
When using dirko how long before you can use saw?
 
Top