how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

Hit BIN on the above pump.

[emoji90] Another China seller used a Dallas, Tx post office box!

Bastards have no scruples!

 

[Workshop]

Might have a bit of corrosion in there. It certainly doesn't take much to foul things up in those.


Oh yeah,
Morning everybody.

 

[MACHINE]

One problem overlooked on a thermoquad or quadrojet is throttle shaft area worn ,, you can drill them out and brass bushing them to stop leak .



Sent from my SM-G955U using Tapatalk

 

[Lurch]

If you have the time. You can drop the rubber feed line on the fuel pump it will gravity feed from the tank. No pump needed.

 

[moparnut88]

One problem overlooked on a thermoquad is throttle shaft area worn ,, you can drill them out and brass bushing them to stop leak .



Sent from my SM-G955U using Tapatalk

Spot on. All carter carbs are that way.


Sent from my iPhone using Tapatalk

 

[67L36Driver]

This pump can have other uses, like on SIL pontoon boat that sat out last season. [emoji57]

And the ‘40 Ford, ‘62 Corvair.

 

[67L36Driver]

What I want to know is; why the chronic failure of the kill switch on the 266se and now the J’red 630. [emoji2955]

And, the fuel and oil caps; some have rubber washer and some have ‘O’ ring. The 266 has both!!! [emoji15]

 

[WKEND LUMBERJAK]

What I want to know is; why the chronic failure of the kill switch on the 266se and now the J’red 630. [emoji2955]

And, the fuel and oil caps; some have rubber washer and some have ‘O’ ring. The 266 has both!!! [emoji15]

Is it a slide left and right or a toggle switch.

 

[67L36Driver]

Slide switch Kenneth.

I bet maybe a bad ground on the old magnesium.[emoji848]

 

[67L36Driver]

Step brothers:

 

[moparnut88]

Out and on the road. Taking the old d7 cat to her new home in awols nick of the woods.


Sent from my iPhone using Tapatalk

 

[Jetmd]

Happy Monday!

Now get to work, I need a stimulus check.

 

[67L36Driver]

Switch on the 630 checks good. Open & closed circuit. So it has to be problem on coil end of the wire. [emoji848]

Most all the parts for the 266se due in today. [emoji1696]Send that pup back home. [emoji106]

 

[Hinerman]

 

[Cat 525]

Morning y'all!

 

[Workshop]

Morning everybody.

 

[67L36Driver]

266se ready to go back home. [emoji108]

Jonsered 630 runs better actually. The 266 I left a tad rich.

 

[plcnut]

A little rich is better than a little lean...

 

[WKEND LUMBERJAK]

Happy Monday!

Now get to work, I need a stimulus check.

Snowflake......

 

[plcnut]