Grease Monkey Garage

[davidwyby]

Srsly

Ideas?

Doesn’t seem metallic enough for a loose bolt

 

[redline4]

What’s that noise?!

Ah mom you’re just jealous

It’s a Che-vy noise!!

It's either the starter drive bouncing off the flex plate or a cracked flex plate in my opinion.
Remove the starter and see if the drive just moves out when you tip the starter down.

 

[davidwyby]

It's either the starter drive bouncing off the flex plate or a cracked flex plate in my expert opinion.
Remove the starter and see if the drive just moves out when you tip the starter down.

fixed

thanks


that's what I told him

poor kid. 4x4 auto tranny drop number two for same raisin. let's not try to rebuild the tranny this time eh?

 

[redline4]

fixed

thanks


that's what I told him

poor kid. 4x4 auto tranny drop number two for same raisin. let's not try to rebuild the tranny this time eh?

Far from expert. Just a dummy with a couple wrenches is all.

 

[davidwyby]

Far from expert. Just a dummy with a couple wrenches is all.

Ok

Very experienced. Probably done it before. Old.

 

[legdelimber]

Hmm. Without seeing the vid, just the noise would have had me wanting to check a radiator fan~water pump.

 

[Bigmac]

I ended up basically trading an aftermarket block for some brand new AFR‘s, they look nice. The block was a lot more than I needed. I it was pretty racy no oil filter boss and all main caps were 4 bolt with a raised cam and spread pan rails, these head will be more useful! Comp cnc ported