WHATS YOUR PICK FOR SAWS AROUND 100CC?

[T.Roller]

Okay, Now that all the kissin and huggin is over. Here is a
good pick for a 100cc saw. 103cc's actually. This will make
a man outta ya. Got to be the cleanest Mcculloch 940 out
there.

I'm speechless

 

[Deets066]

Okay, Now that all the kissin and huggin is over. Here is a
good pick for a 100cc saw. 103cc's actually. This will make
a man outta ya. Got to be the cleanest Mcculloch 940 out
there.

Lee, I have a complete saw that is very similar to this. It seems a bit larger but it is currently in a box. What other models could it be? There is no model number on it. I remember looking a while back and thought it could possibly be a 121 B

 

[Lee H]

These Pioneers pack a damn good punch. At 99cc's with
there light weight design are a hard saw to beat.

 

[Lee H]

This is a really nice 100cc saw. Poulan S6000 made
by Sachs Dolmar model 153

 

[Lee H]

This is a really mint Mcculloch 895, 103cc's and will pull
very long bars with 1/2 pitch chain with ease.

 

[Redfin]

This is a really nice 100cc saw. Poulan S6000 made
by Sachs Dolmar model 153

Uncle Lee, have you read my signature lately?

 

[Lee H]

These are actually kinda rare. The Mcculloch SP105 at 106cc's.
There bigger brother dominated in sales the SP125. This 105
is the nicest i have seen.

 

[Iron.and.bark]

Uncle Lee, have you read my signature lately?

So I'm not the only one coveting the green dolmar...

 

[Lee H]

Mcculloch PM1000 made by Partner P100, 100cc saw.
They run pretty good but not your most powerful 100cc saw.

 

[Lee H]

Here is a very rare saw. Homelite 770GS Stick Shift. This saw has
a two speed transmission. Yaaa, Throwin chips in first and second.

 

[Lee H]

These Echo 1001VL's actually run pretty well. Lots of torque for a 100cc saw.
Largest Echo allowed in the states.

 

[T.Roller]

Here is a very rare saw. Homelite 770GS Stick Shift. This saw has
a two speed transmission. Yaaa, Throwin chips in first and second.

 

[Lee H]

Strap your harness on boys. Stihl 090G 106cc's of
stump pullin geardrive power.

 

[Jon1212]

Darin and Kevin, thank you both for stepping up to the plate like Men.

Now back to da saws.


This one I thought would be a better runner with the quads. All Ive done so far is set squish and mm. It will get ported at some point.View attachment 41894View attachment 41895

Did that bar show up?

 

[Lee H]

A pair of Homelites last geardrives. The 1130G with
a 100cc stump pullin motta. Hang on cuz they will
pull you right into the wood and if they pinch the bar
out they come in a hurry as with any geardrive.

 

[Redfin]

Did that bar show up?

Dammit. I meant to write you. Yes and I ruined two utility blades opening my packing. Thanks

 

[Jon1212]

Dammit. I meant to write you. Yes and I ruined two utility blades opening my packing. Thanks

I wanted to make extra sure it didn't get scratched up, or try to escape.

 

[Lee H]

Lee, I have a complete saw that is very similar to this. It seems a bit larger but it is currently in a box. What other models could it be? There is no model number on it. I remember looking a while back and thought it could possibly be a 121 B

Got any pic's. Pioneer made lots of models that were similar
in appearance.

 

[Lee H]

Uncle Lee, have you read my signature lately?

I been lookin fer ya. One will come along.
Be patient my dear.

 

[Jon1212]

I'm speechless

I'm calling "*B-S....!" on that dot dot dot