WHATS YOUR PICK FOR SAWS AROUND 100CC?

[hseII]

this one's pretty healthy. don't feel like anything special in less than 3' tho.

View attachment 25956

I was not impressed with the one I had, but that was with a 0.404" 36" hard nose.

My 660 does 36" better, with 3/8".

 

[sawfun]

I agree, my 066 running 3/8 was stronger than my 076 super running .404 both with 36" bars. I really had to baby the 076 not to stop the chain and it was on excellent shape.

I was not impressed with the one I had, but that was with a 0.404" 36" hard nose.

My 660 does 36" better, with 3/8".

t

 

[rocketnorton]

most o my other 6cu+ have 404 on em.

 

[Jose A.S.T.S.]

Very much enjoying this thread gentlemen didn't know anything about the 999 or the 1201 or the 603 very little about the 153 d.s. keep talking guy I'm just soaking it in....

 

[Barneyrb]

I have a 2101 and the PP655. The 2101 will cut faster with a 36" or less bar on it but the 655 will run slightly better with anything longer. For just the down-rite cool factor I consider it a toss up, both sound great when loaded and running hard.

 

[Lee H]

most o my other 6cu+ have 404 on em.

Most of my big cube saws are running 404 as well but i do have a
couple with 3/8 and the 3/8 cut really nice and might be a touch faster.
Been meanin to put a 3/8 rim on a 797 and see how it will cut. Got a
125 with a 60 running 3/8 and she cuts nice. My big bore 166 has 38 incher
with 3/8 and it likes it.

 

[hseII]

I have a 2101 and the PP655. The 2101 will cut faster with a 36" or less bar on it but the 655 will run slightly better with anything longer. For just the down-rite cool factor I consider it a toss up, both sound great when loaded and running hard.

I wonder how the stroke & bores compare on those 2: I always thought those were the 2 best in this class.

And if you ever decide you don't need 1 of the 5, I know a fellow. [emoji38][emoji38]

 

[hseII]

Very much enjoying this thread gentlemen didn't know anything about the 999 or the 1201 or the 603 very little about the 153 d.s. keep talking guy I'm just soaking it in....

Likewise: I enjoy gleaning good information from those that know.

It's nice that Moobsy hangs out here too. [emoji23][emoji23]

 

[Barneyrb]

I wonder how the stroke & bores compare on those 2: I always thought those were the 2 best in this class.

And if you ever decide you don't need 1 of the 11, I know a fellow. [emoji38][emoji38]

Fiiixxxxddddddd

Husky 56x40
PP655 57.1x38.1

 

[hseII]

Fiiixxxxddddddd

BaHaHaHaHaHaHa.

I only know about the 4 655s.

 

[hseII]

Fiiixxxxddddddd

Husky 56x40
PP655 57.1x38.1

That might explain it then.

 

[Lee H]

BaHaHaHaHaHaHa.

I only know about the 4 655s.

Someone has more 655's than me.
I only's have three.

 

[hseII]

Someone has more 655's than me.
I only's have three.

It's Ok though, you got everyone else with the 29- 143s. [emoji38][emoji38]

 

[Guido Salvage]

I had 5 655's and a P-65, but I sold one.

 

[Iron.and.bark]

Fiiixxxxddddddd

Husky 56x40
PP655 57.1x38.1

Solo 603. 56x42

 

[Toad22t]

Here is my stock 298 running a 36" with .404! My hacked up 385 and Rattler'd 288 both beat it running a 32" 3/8 square. But they didn't like the .404 chain one bit.

 

[hseII]

The Dolkivarna is the lightest 111cc saw you'll ever pick up but I'm not building another... don't even ask!

But now that you got all the bugs worked out, why Knot?

 

[Jon1212]

Here is my stock 298 running a 36" with .404! My hacked up 385 and Rattler'd 288 both beat it running a 32" 3/8 square. But they didn't like the .404 chain one bit.

Oregon 59L?

 

[Jon1212]

It's Ok though, you got everyone else with the 29- 143s and the 26- 166's. [emoji38][emoji38]

Phicksed, for the good of the community.

 

[sawfun]

While they are 6 cube saws, I can add that the my Mac 795 and a 105 I have run do not have the speed or torque of my BP 655 with a 35" bar. I would guess this with a 1050 Homie as well.