What's on your bench?

[huskihl]

View attachment 366693

Yumm

 

[Woodslasher]

A few pics of the tailgate teardown I did on my 660 a few days ago and the latest graduate of the Slasher workbench. The carb kit, clutch drum, and little cover plate for the 201 showed up so I was able to slap it back together and fire it up.

 

[drf256]

MS360 I had done that locked up. Fairly certain was a runner I didn’t do the bottom end on. Locked up fast enough to not have much piston or jug damage despite a bunch of metal in the saw.

 

[drf256]

 

[huskihl]

View attachment 366858View attachment 366859

Looks like rust and efflorescence on a couple of the bearings. Probably from previous or maybe current ethanol use? Or condensation drawing water in

 

[sawnami]

Tinkering on a Disston DO-100.
New sprocket shaft seal and upgrading to a DO-101 fuel metering unit.

 

[drf256]

Looks like rust and efflorescence on a couple of the bearings. Probably from previous or maybe current ethanol use? Or condensation drawing water in

Hard to know. The owner decided to ”help” me by taking the saw to the car wash and power washing it before shipping. It sat for an unspecified amount of time before he shipped it to me. The carb, muffler and case had water in them.

Ordinarily it wouldn’t matter if one did this and ran the saw asap afterwards. This one sat after the bath.

 

[Mack 880]

This one sat after the bath.

Preventable mistake for sure. At least the outside is clean !

 

[Matt Ellerbee]

Tearing down a 200t and found some door hardware wedging the exhaust up against cylinder. No bolts. And from looking at cylinder, she’s done. How does a 200 muffler actually mount?

 

[Stevetheboatguy]

Before.......



During...



After.....



See If tomorrow I can get it in some wood for a test and tune.

Big Thank you to @jacob j. And @beaglebriar


Steven

 

[Woodslasher]

My mess at the moment: The silvery Huskies are waiting on chains as well as the 362, the 350 needs a clutch spring, the 125 is finally complete with some help from a few forum guys but I need to figure out a spark issue, the 390 is getting cleaned up for a visit out east, the sideways 056 is in the same boat as the 125, and the 660 is waiting on a slug. The truck parts behind the saws are gonna be their own bundles of joy before too long....

 

[JD22]

View attachment 220 the start of an 036 build

Cool setup!

 

[davidwyby]

Most people will know these adapters to run a Stihl bar on a Husqvarna. Over here they are not that common, so I made a 3d model and printed it on my 3d printer. View attachment 363612 View attachment 363613

Found that the 395XP has a small bumb on the inner bar plate, that's why there are 2 versions. It actually feels quite solid but I will try to make them out of a metal with the help of a small cnc mill.

My adapter for my 395 didn’t fit my 288 so I ordered metric tubing and made rings that fit over the bar studs. The tubing was pretty long so I have a lot of them if anyone wants some.

 

[davidwyby]

Mainly have my 288 to rebuild, and then a couple shelves of project saws for the summer…super XL 925, mmm

 

[huskihl]

 

[Kiwioilboiler]

View attachment 367236
View attachment 367234View attachment 367235View attachment 367233

Dunno what I'm looking at, but it's affecting my downstairs.

 

[GerbrandR]

My adapter for my 395 didn’t fit my 288 so I ordered metric tubing and made rings that fit over the bar studs. The tubing was pretty long so I have a lot of them if anyone wants some.

I noticed that too, same for a 266 for example. Didn't have the time yet to measure them, but it would be easy enough to make a similar design as the other one.

 

[beaglebriar]

Before.......
View attachment 367193


During...

View attachment 367195

After.....

View attachment 367194

See If tomorrow I can get it in some wood for a test and tune.

Big Thank you to @jacob j. And @beaglebriar


Steven

Looks much better Steve!!

 

[Squareground3691]

View attachment 367236
View attachment 367234View attachment 367235View attachment 367233

Me likey

 

[huskihl]

Dunno what I'm looking at, but it's affecting my downstairs.

2094