What's on your bench?

[RI Chevy]

Good Will. no covid.
Good luck Billy C.

 

[Johnmn]

Got my rona test results and I'm negative!
GF is still waiting for her results.

Sent from my E6910 using Tapatalk

I'm in quarantine now waiting on my test to come back.

Pay attention to how you feel guys, I have been tested 3 times and all came back negative but confirmed by my doctor. I have been sick off and on for 8 weeks now, I thought I was over it and then bam here I am sick again! I'm going to the doctor again tomorrow.

I truly underestimated this and did not take it seriously. I am 35 years old and healthy and this has kicked my ass!

 

[WillG]

Got bored after dinner and made the new impulse hose and reassembled the saw. Runs pretty good now. Need to wood test. Hopefully this weekend.

Sent from my E6910 using Tapatalk

 

[Ronie]

Pay attention to how you feel guys, I have been tested 3 times and all came back negative but confirmed by my doctor. I have been sick off and on for 8 weeks now, I thought I was over it and then bam here I am sick again! I'm going to the doctor again tomorrow.

I truly underestimated this and did not take it seriously. I am 35 years old and healthy and this has kicked my ass!

I think a lot of people have underestimated this virus, hope you start to feel better soon.

 

[WillG]

Good news GF tested negative as well! Have a toilet to repair today. Got it apart just need to get the gasket and bolt kit from Home Depot later today.

Sent from my E6910 using Tapatalk

 

[Al Smith]

It's escalated from an annoyance to an all out battle .I'll be damned if I'm going to let a Japanese name on a German designed product ever get the best of me .These pair of motherless children will fire on a prime but not pump enough to keep running . I suppose it could be both fuel filters could be clogged from sitting too long with a dry tank .never checked that .I'll get it and when I do if I never see another one of these things in my life time it will be too soon .I can see why now I got them so cheap .

 

[RI Chevy]

Good news GF tested negative as well! Have a toilet to repair today. Got it apart just need to get the gasket and bolt kit from Home Depot later today.

Sent from my E6910 using Tapatalk

Jeeesh. That job stinks Will. Glad to hear your both negative.

 

[WillG]

Jeeesh. That job stinks Will. Glad to hear your both negative.

Thanks Jeff. Wasn't too bad. Just cost a little bit of time and $11 for the gasket and bolt kit at the local Granite Group plumbing supply house. Back to work on Monday.

Sent from my E6910 using Tapatalk

 

[WillG]

Next thing to do to the new Escape.

Sent from my E6910 using Tapatalk

 

[tickbitintn]

Needed another saw like I need another hole in my head...

Picked these up today....

Sent from my XT1635-01 using Tapatalk

 

[CTMike74]

Picked this Farmertec up on Amazon for $150. Ms440 big bore... cases, crank, bearings, top end. Even has oil line already installed. No heat tape though. Better send it back!

Sent from my iPhone using Tapatalk

 

[Kiwioilboiler]

It's escalated from an annoyance to an all out battle .I'll be damned if I'm going to let a Japanese name on a German designed product ever get the best of me .These pair of motherless children will fire on a prime but not pump enough to keep running . I suppose it could be both fuel filters could be clogged from sitting too long with a dry tank .never checked that .I'll get it and when I do if I never see another one of these things in my life time it will be too soon .I can see why now I got them so cheap .

Don't give up mate! I have a mate who is a concrete guy, so i'll have to look into one of his saws soon enough and might need to know what you found.

 

[WillG]

Got the hitch installed on the new Escape. Was pretty simple. Had my dad's cousin give me an extra pair of hands. Took us about an hour. Still need to install the wiring harness.

Sent from my E6910 using Tapatalk

 

[Al Smith]

I've got that carb pickling in a can of acetone at the moment . If it's got shellaced gas in it that should get it out .If it's brick dust most likely not .Damned thing is special Walbro WJ 5a 835 .Evidently that model was a freak only used on concrete saws . Pot lickers want at least 90 bucks for a new one .--the sun will rise in the west before that happens .
I've got a set of torch tip wires with some real thin wires which might be next .

 

[Kiwioilboiler]

I've got that carb pickling in a can of acetone at the moment . If it's got shellaced gas in it that should get it out .If it's brick dust most likely not .Damned thing is special Walbro WJ 5a 835 .Evidently that model was a freak only used on concrete saws . Pot lickers want at least 90 bucks for a new one .--the sun will rise in the west before that happens .
I've got a set of torch tip wires with some real thin wires which might be next .

Old mates got an orange 395 and a yellow 394? based machine at the moment, but he's the type to turn up wit a Dolkita and say "I got this, are they good?"......

 

[Kiwioilboiler]

Any one able to help me i.d. this? Might be regional issue. Mower deck is removed, hope is to use as a mini tractor for son to tow his dinghy a couple of hundred metres to the water.
All I've got so far is the Bolens sticker and the power plant pic to go by.

 

[Moparmyway]

Any one able to help me i.d. this? Might be regional issue. Mower deck is removed, hope is to use as a mini tractor for son to tow his dinghy a couple of hundred metres to the water.
All I've got so far is the Bolens sticker and the power plant pic to go by.

Not sure what you are askin, but it’s a Bolens tractor with a 15 horse Tecumseh I/C engine on it. What are you lookin for ?

 

[Kiwioilboiler]

Not sure what you are askin, but it’s a Bolens tractor with a 15 horse Tecumseh I/C engine on it. What are you lookin for ?

Haha, thanks Kevin. A more specific model number?

 

[huskihl]

Haha, thanks Kevin. A more specific model number?

It’s a fuggin’ Billy. Says so right there on da hood

 

[Kiwioilboiler]

It’s a fuggin’ Billy. Says so right there on da hood

Thanks, that's all cleared right up then.