What oil is best? and what ratio?

[andyshine77]

I'm good. Seriously. I intend to avoid using any new to me oil for the rest of my life.

 

[huskyboy]

200,000 - 275,000 bd ft on using 40:1 husky XP + oil 80% of the time I would say (this oil replaced the old “XP” oil). Imo it runs a bit cleaner than the older version XP oil. Notice the lack of carbon behind the rings.

 

[Mastermind]

200,000 - 275,000 bd ft on using 40:1 husky XP + oil 80% of the time I would say (this oil replaced the old “XP” oil). Imo it runs a bit cleaner than the older version XP oil. View attachment 245351View attachment 245352 View attachment 245353Notice the lack of carbon behind the rings.View attachment 245354

That's damn good oil too.

 

[rogue60]

200,000 - 275,000 bd ft on using 40:1 husky XP + oil 80% of the time I would say (this oil replaced the old “XP” oil). Imo it runs a bit cleaner than the older version XP oil. View attachment 245351View attachment 245352 View attachment 245353Notice the lack of carbon behind the rings.View attachment 245354

Nothing wrong with that oil looks really good zero blowby would be a strong runner.

 

[andyshine77]

That looks really good! nothing wrong there.

 

[RI Chevy]

I ran some Klotz Original Techniplate at 32:1 yesterday milling. About a gallon or so. I was surprised at how clean it ran.
Totally cleaned up my exhaust port. Even cleaned the crown on piston.
I imagine 660 got pretty hot after many WOT tanks. Lol

 

[huskyboy]

I agree guys and the only other oils I ran in it if I didn’t run the xp was a bit of saber, dolmar synthetic, echo powerblend or red armor. I had good luck with those too. But like I said 80% time that was nothing but gallon after gallon of xp + since we use it at work. The 572 was definitely ran hard I can attest to that, I even milled with it a few times. I think that has to help cleanliness a bit to burn out carbon.

 

[Kiwioilboiler]

Is that Shaeffers Supreme 9000? https://www.schaefferoil.com/2-cycle-oil.html

get out of it ehoa, you probably haven't even unwrapped the Amsoil Dominator yet!

 

[Mastermind]

Interesting...

I managed 3.5 minutes.

Good Lord.

 

[markds2]

get out of it ehoa, you probably haven't even unwrapped the Amsoil Dominator yet!

Doesn't look like the distributor for NZ brings it in anyway

 

[SOS Ridgerider]

Is this the Schaeffer’s oil everyone talking about?

 

[Roadfxr]

Is this the Schaeffer’s oil everyone talking about?
View attachment 245412

Yes that’s it.

 

[huskihl]

Is this the Schaeffer’s oil everyone talking about?
View attachment 245412

Yep

 

[SOS Ridgerider]

Yes that’s it.

Yep

Cool. Thanks guys. I might have to get some. Just because.

 

[Bilge Rat]

I'm good. Seriously. I intend to avoid using any new to me oil for the rest of my life.

Bullfeathers!
You can't leave well enough alone. That would be very boring to you.

 

[andyshine77]

OK, so who here is an Amsoil salesman? [emoji1][emoji1]

 

[Czed]

Is this the Schaeffer’s oil everyone talking about?
View attachment 245412

That'll mix 6 gallons

 

[Czed]

Interesting...

Spuege

 

[Mastermind]

So.....I just bought a gallon of Yamalube 2R for less than 50.00 shipped. Can y'all guess which oil I'll be using for the near future?

 

[Czed]

So.....I just bought a gallon of Yamalube 2R for less than 50.00 shipped. Can y'all guess which oil I'll be using for the near future?

Red armor.