What oil is best? and what ratio?

[Keith Gandy]

Kl200

Yes sir! Hows that workin out so far?

 

[CoreyB]

Maybe my local fuel available is crap? 91 e free but hey that doesn't mean it is great.

 

[X 66 stang347 X]

The only thing that I have to spooge is my fs80. And that's in any oil I've tried. Every one I've seen does that. To much exhaust savaging I guess?

 

[Keith Gandy]

I ran stihl ultra for a while and no matter how I tuned it on any of my saws it would leave goo at the exhaust. The bigger saws where not as bad as smaller saws and my weedeater would just oooozzz down the muffler and even down the side of the case.

Kinda looks like dark roast finely ground run through a mess screen without a filter??!!!

 

[Magnumitis]

Maybe my local fuel available is crap? 91 e free but hey that doesn't mean it is great.

Whatever a station sells the most of, freshest, should be best. Even if it's ethanol.

 

[X 66 stang347 X]

Yes sir! Hows that workin out so far?

So far I like it. I haven't had any real test in my 4 mix equipment yet.
I've thought about mixing 15-20% of sgupertechniplate in with it on my br420. Running mostly wide open I want to test it. What you think

 

[X 66 stang347 X]

Just for chits and giggles I have a bg50 that had a shot piston so I put a 2 ring bg55 piston in it. I'm only running super techniplate in it to see what it does. I have it tuned a little on the lean side.

 

[Keith Gandy]

Just for chits and giggles I have a bg50 that had a shot piston so I put a 2 ring bg55 piston in it. I'm only running super techniplate in it to see what it does. I have it tuned a little on the lean side.

Lord I dont have a clue. My experience with it was a stuck ring in 3 tanks of fuel on a new 550xp with alota blowby also. Id be very interested to see in that 50/55 setup

 

[X 66 stang347 X]

In that bg50 it's 100% super. Since it's always under load I want to see if it's enough to burn it. At $2.50 a pint I had to try it in something. It's also running no base gasket, timing bump and a muffler mod. Lol. It picked up 300 rpm

 

[Keith Gandy]

In that bg50 it's 100% super. Since it's always under load I want to see if it's enough to burn it. At $2.50 a pint I had to try it in something. It's also running no base gasket, timing bump and a muffler mod. Lol. It picked up 300 rpm

Crimping the end of the output tube will make her pick up alota rpm!!!. I like the oval output for velocity but the round output seems to have better volume

 

[sawmikaze]

Never used it Ryan. From what I hear it is but thats like my opinion and everyone elses being just an opinion

A guy told me that being semi synthetic its the best of both worlds.

 

[danimal]

So you're calling Stihl ultra a cheap oil? First time I've heard that.

Stihl ultra is crap! Mix decomposes in 90 days or less.im late to this party cause I've been burning dominator @ 32-1 bucking n noodling a humongus burr oak the last 2 days.

 

[danimal]

The Klotz Super is very dirty but I think it could be used with a spot on tune. Have u tried Klotz Original Techniplate? Its not dirty at all

Nope! Im gonna stik wiff whut I gots...

 

[CoreyB]

I am glad there are so many great options. If you don't like one for what ever reason you can grab another.

 

[huskihl]

Stihl ultra is crap! Mix decomposes in 90 days or less.im late to this party cause I've been burning dominator @ 32-1 bucking n noodling a humongus burr oak the last 2 days.

I was being a teenie bit sarcastic. You of all people should have recognized that

 

[Cut4fun]

@Moparmyway think you were the one asking last year what the tops looked like 32/1 kl200. Was a new afm 066 piston.

Well I just pulled the cylinder on my wild thing to help a guy out with his 2083.

Muffler dry, piston coated. Cant ask for anything else from the oil IMO.

 

[junkman]

Looks pig rich .

 

[Cut4fun]

Looks pig rich .

I agree I was slipping in the oil on the floor from it being so pig rich too.

 

[Nitehawk55]

Stihl didn't have an Ultra when I left the company in 2005 , all there was at that time was the regular oil made to our specs by Castrol and it was a clean burning oil .
Why Stihl would use a lesser oil in the Ultra does not make sense at all . All I can think of is they were trying to produce a cleaner burning oil for the 4 mix engines that were having a lot of issues from carbon but by the sound of it ultra isn't even near improving that and it's been on the market for several years so I'm sure they must be aware it's not working well and I'm sure they have had lots of complaints .
Strange for a company such as Stihl to let something like that slide and not improve it .

 

[jake wells]

Stihl didn't have an Ultra when I left the company in 2005 , all there was at that time was the regular oil made to our specs by Castrol and it was a clean burning oil .
Why Stihl would use a lesser oil in the Ultra does not make sense at all . All I can think of is they were trying to produce a cleaner burning oil for the 4 mix engines that were having a lot of issues from carbon but by the sound of it ultra isn't even near improving that and it's been on the market for several years so I'm sure they must be aware it's not working well and I'm sure they have had lots of complaints .
Strange for a company such as Stihl to let something like that slide and not improve it .

ultra was developed for the the 4 mix engines just like when shindaiwa had red armor developed for their 2/4 hybrid engines.