Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

[Wonkydonkey]

When I changed my muff (pea shooter thread) to a ft, I just left it in place even thou I had to make a spacer.
My reasons were,,,, flywheel blows cool air, I want to make it go where the heat shield was there to do. Not over the muff

Cheers

 

[Stihlsmoking]

Ok... so I've read through most of this. Is the consensus not to use a heat shield if using the spacer?

Sent from my SM-G955U using Tapatalk

For my last 034 build I used a 036 muffler which needed a spacer
(First spacer I’ve ever needed) and the heat shield wouldn’t fit ?
I use heat shields if they fit. This last one was pieced together and original muffler was rusted out at top lip.

 

[trooney]

For my last 034 build I used a 036 muffler which needed a spacer
(First spacer I’ve ever needed) and the heat shield wouldn’t fit ?
I use heat shields if they fit. This last one was pieced together and original muffler was rusted out at top lip.

That's been my experience too. Don' know if the heat shields were just for the 036 models and not the 034. Even my Supers don't have them. But spacer is a must if you're putting an 036 style muffler on an 034/034S cylinder.

 

[brandonstclair20]

I guess this is just a plane Jane non decomp 036 cylinder as mentioned earlier in this thread, has the dimple in top. What was odd about the saw is that it has the plastic wrap handle, newer style starter, and was made in USA but has the non-decomp cylinder, tall tank vent, non-compensating carburetor, old style air filter. Also a 034 air filter cover fits it.

Sent from my iPhone using Tapatalk

 

[10/80]

Having a look at my 034 saws today, I know the saw in pic #1 is a 46mm cylinder and the saw in pic #4 is a factory 48mm 034 Super... Saws #2 & #3 were badged as just 034 though their cylinders appear to be the 48mm version?.....All four cylinders are KS type.

 

[RI Chevy]

Nice!

 

[Stihlsmoking]

Having a look at my 034 saws today, I know the saw in pic #1 is a 46mm cylinder and the saw in pic #4 is a factory 48mm 034 Super... Saws #2 & #3 were badged as just 034 though their cylinders appear to be the 48mm version?.....All four cylinders are KS type.

We’re they just 034av or did they say 034avs

 

[10/80]

We’re they just 034av or did they say 034avs

Only one saw is badged as a 034 Super.

 

[RI Chevy]

Looks like you hit the jackpot then. Lol

 

[10/80]

Looks like you hit the jackpot then. Lol

It would appear so!....If they're indeed factory fitted 48mm cylinders I wonder how common this practice was?

 

[Bigmac]

I had a standard 034 with a 48mm jug, it had strait slot screws for the handle and was made in German, non adjustable Oiler, it looked all original...but who knows!

 

[10/80]

It will be interesting to see how many 034 saws turn up now with factory 48mm cylinders.

 

[RI Chevy]

I'm gonna look alot closer now. LOL

 

[Bigmac]

I didn’t think anything of it except someone swapped the jug, but now maybe not!

 

[brandonstclair20]

This is an odd Stihl warning label that was on a 034 crankcase I sold.

Sent from my iPhone using Tapatalk

 

[10/80]

This is an odd Stihl warning label that was on a 034 crankcase I sold.

Hmm...I'm not sure I understand what you're saying.

 

[trooney]

Hmm...I'm not sure I understand what you're saying.

I'll second that!! Lol

 

[brandonstclair20]

Hmm...I'm not sure I understand what you're saying.

I’ve never seen this type of label, I’m just saying it’s odd


Sent from my iPhone using Tapatalk

 

[10/80]

I’m just saying it’s odd

It belongs here then!

 

[10/80]

Anyone know what the machined area is for?