Play time?

[Red97]

Old skool 372 up through 395.
One from a side mounted decomp

You happen to have a part number?

I only found 1 decomp in my entire shop. Cheap am one.

Knew better, bit tried starting it with an old carb... 20 min later trying to fiddle with it, I swapped a good carb. Fired right up...

 

[Czed]

https://www.hlsproparts.com/product...XH32NSlsJd4_CATQb8Ef-mfRuTe2MLCIaAubgEALw_wcB
Looks like this

 

[Czed]

You happen to have a part number?

I only found 1 decomp in my entire shop. Cheap am one.

Knew better, bit tried starting it with an old carb... 20 min later trying to fiddle with it, I swapped a good carb. Fired right up...

The am one's don't like high compression saws
Or low compression saws either.

 

[huskihl]

The am one's don't like high compression saws
Or low compression saws either.

Lol

 

[huskihl]

You happen to have a part number?

I only found 1 decomp in my entire shop. Cheap am one.

Knew better, bit tried starting it with an old carb... 20 min later trying to fiddle with it, I swapped a good carb. Fired right up...

Yissum

503 71 53-01

 

[Red97]

Yissum

503 71 53-01

Thank you.


I think i may dish the piston...

After i put it in wood.


Guess it could just be tight from fresh bearings/Seals.

 

[huskihl]

Thank you.


I think i may dish the piston...

After input it in wood.


Guess it could just be tight from fresh bearings/Seals.

Could run just the bottom ring...

 

[P.M.P.]

Hope to get these in wood Sunday

So your going to take your new baby for a test drive on Sunday

Sunday driver you are...

 

[Red97]

Could run just the bottom ring...

Yeh..... Running a caber top, China bottom currently

 

[Red97]

So your going to take your new baby for a test drive on Sunday

Sunday driver you are...

Both of them... long bar short bar, see what they have.

 

[so il logger]

Could run just the bottom ring...

Eye see what you dun there.....

Lol

 

[huskihl]

Eye see what you dun there.....

Lol

Howdy Jon

 

[drf256]

You happen to have a part number?

I only found 1 decomp in my entire shop. Cheap am one.

Knew better, bit tried starting it with an old carb... 20 min later trying to fiddle with it, I swapped a good carb. Fired right up...

I’ve got some 395 decomps if you need one Joe. They do work better than Stihl, and even better if you drill ‘em out a bit. Don’t pop early like the Stihl ones do.

 

[Red97]

Not too shabby.

 

[huskihl]

Are ya dead?

Did she eksplode?

 

[Woodpecker]

Not too shabby.

Awesome! Now to strap a 48mm slug n jug on to a 501. 10 pound 60cc saw. Yes please!

 

[Red97]

24" light full of fluids.

17.5 lbs

 

[Red97]

Are ya dead?

Did she eksplode?

Not yet

But it is harder on fuel..

 

[Red97]

See if I can get This to fit..

 

[cuinrearview]

Nice runner. That log looks like the sister of @huskihl 's