Husky 350 Question.......

[Bluefish]

Wife's cousin

Hope he is a good guy, that is a beauty...

Russ

 

[Adirondackstihl]

Hope he is a good guy, that is a beauty...

Russ

Yeah
He's a great kid!
25yr old, just inherited his parents homestead.
Works for the state fish hatchery.
Getting married soon.

 

[Adirondackstihl]

 

[jakethesnake]

I dig the sticker

 

[Adirondackstihl]

I dig the sticker

 

[Adirondackstihl]

So.....I did this.
I couldn't help it.

 

[Adirondackstihl]

This too......

 

[Adirondackstihl]

Modified 266 deflector.
This is how I do all of these sumbiches...

 

[psuiewalsh]

You going to add a muffler support bracket?

 

[Backtroller]

Good idea on the plastic cased Saw

 

[Adirondackstihl]

You going to add a muffler support bracket?

If I had one, I would.
Unfortunately I don't have a spare.

 

[psuiewalsh]

I think you can cut the short leg off a 346 style and it works. They are $6 on eBay. Not sure dealer price

 

[Adirondackstihl]

I think you can cut the short leg off a 346 style and it works. They are $6 on eBay. Not sure dealer price

I'm already way over $ what I told him it was gonna be.
I put a good dose of loctite on the muffler bolts.
Hoping it holds.

He wants the saw back as bad as I want the $ I dished for the parts.

Another option is to drill the bolts and wire them.

 

[Dub11]

I'm already way over $ what I told him it was gonna be.
I put a good dose of loctite on the muffler bolts.
Hoping it holds.

He wants the saw back as bad as I want the $ I dished for the parts.

Another option is to drill the bolts and wire them.

I got a 2150 from @t4driller and he tapped to the next size (m6?) and locktite.
I tried taking them out to install a bracket and couldn't get them loose lol.

 

[Adirondackstihl]

I got a 2150 from @t4driller and he tapped to the next size (m6?) and locktite.
I tried taking them out to install a bracket and couldn't get them loose lol.

I had to helicoil the PTO side muff mount hole.
All I have here is M5

 

[Wood Doctor]

Brought in my second truckload of ash today with my Husky 350 and an 18" bar. One tank of fuel is all it took. Of course, I had to start at 7 am and finish as 8:30 am. Still a little heat out there, by 10 am it was pushing 90 F. That's the way it is these days. Regardless, the 350 kept on purring.

My 353 was jealous but heck, I can only run one saw at a time. Guess I need to learn to share the load. Here's the jealous one:

 

[psuiewalsh]

288 muffler bolts work at 6mm. You have to ream the muffler tubes with a drill bit. I can't remember the length of them but I think it's these.

Sent from my XT1585 using Tapatalk

 

[Wood Doctor]

These might work:
http://www.hlsproparts.com/ProductDetails.asp?ProductCode=H71350

 

[t4driller]

These are the bolts I used. Got them from a hardware store. I drilled and tapped the muffler flange, and like Keith said you have to ream the muffler holes out to fit.

 

[t4driller]

I had to helicoil the PTO side muff mount hole.
All I have here is M5

If your hardware store doesn't have them let me know. I'll send you a dozen.