how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Semotony]

I've been kind of looking around for a recoil pad.

Something the size of my bedroom pillow.

Once you start installing a new pad, find the right length to trigger. Holding the rifle with hand on grip finger on trigger (bolt open) the correct length will place the end of the stock against the bicep with elbow @ 90 degrees. At least that is shotgun sizing
Happy birthday young man! 5:02 is the end ofmy # 69

 

[BrettL]

Happy birthday Steve!

 

[Workshop]

Thanks everybody.
Today I've been upgraded to version 6.4.
Today has been a good day. I made Goldie's Christmas present. She wanted an 8 foot foldable sewing table, so I built one. When it was all done and folded up the thing weighed more than her and I could lift together. It quickly got turned into two 4x4 tables with foldable legs instead.

 

[Dub11]

Thanks everybody.
Today I've been upgraded to version 6.4.
Today has been a good day. I made Goldie's Christmas present. She wanted an 8 foot foldable sewing table, so I built one. When it was all done and folded up the thing weighed more than her and I could lift together. It quickly got turned into two 4x4 tables with foldable legs instead.

HBD Steve, and dis she get you a saw or gun?

 

[Hedgerow]

HBD Steve, and dis she get you a saw or gun?

My money is on a cake...

 

[countryhog]

Steve, Hope your day of remembrance was happy

 

[MACHINE]

Last ms170 had a bad air leak , found it ,,, the pan bolts were loose and air leak was as bad as I've seen , dissembled saw, cleaned it and reworked pan , leak fixed, let sealant cure overnight and try saw tomorrow.

What 12 inch bar and chain you all suggest? I want a thin one for limbing

Sent from my SM-G955U using Tapatalk

 

[plcnut]

Charity cut in Mansfield Missouri is set for 1/16/2021
It will be at the same location as 2 years ago.

 

[Hedgerow]

Charity cut in Mansfield Missouri is set for 1/16/2021
It will be at the same location as 2 years ago.

Excellent..

Thomas will come with me. He’s been chomping at the bit..

 

[Cat 525]

Happy birthday Steve!

 

[Workshop]

HBD Steve, and dis she get you a saw or gun?

Neither.
I told the family I didn't want them spending money on my BD. I just wanted time with my kids. We communicate a lot through messenger
and Facebook, text, all sorts of ways to stay in touch. Even a phone call. But it's not the same since they're all out of the house or out of state.
They all have lives now of their own and I understand that but it's nice just spending time with them. That's all the BD present I want.

 

[Hedgerow]

Some of the proceeds from the excavator..

Not sayin it makes cutting hedge any more pleasant, but the skid steer helped a little..

Hey Kyle, what’s the most reliable skid steer you ever had any dealings with?
Done fixing that Takeuchi yet?

 

[plcnut]

Hey Kyle,
Done fixing that Takeuchi yet?

No, he is too busy sitting around at my house for the weekend...

 

[moparnut88]

View attachment 273234

Some of the proceeds from the excavator..

Not sayin it makes cutting hedge any more pleasant, but the skid steer helped a little..

Hey Kyle, what’s the most reliable skid steer you ever had any dealings with?
Done fixing that Takeuchi yet?

Takeuchi tl140-150 or gehl ctl70-80. Same machines. Very tough and reliable. And with a pump adjustment and hyd adjustment will do way more than they should but they will take it in stride. Our old ctl70 was turned up and would pick near 8k without issues.


Sent from my iPhone using Tapatalk

 

[Workshop]

Morning everybody.

 

[Hedgerow]

Takeuchi tl140-150 or gehl ctl70-80. Same machines. Very tough and reliable. And with a pump adjustment and hyd adjustment will do way more than they should but they will take it in stride. Our old ctl70 was turned up and would pick near 8k without issues.


Sent from my iPhone using Tapatalk

Tracks worth the extra coin?

 

[Hedgerow]

Oh, and who makes the engines in the Takeuchi and Gehl machines?

 

[moparnut88]

Tracks worth the extra coin?

I tried to get away with tires. And even with over the tire steel tracks couldn’t get done what I needed. So yes for me there is no replacement for the tracks. They also make steel tracks that replace the rubber tracks if your gonna be off road all the time. They use them on the machines with mulchers all the time.


Sent from my iPhone using Tapatalk

 

[moparnut88]

Oh, and who makes the engines in the Takeuchi and Gehl machines?

The ctl 80 and tl150 is Yanmar. That’s the best. The 70 and tl140 have an is an isuzu.


Sent from my iPhone using Tapatalk

 

[Hedgerow]

The ctl 80 and tl150 is Yanmar. That’s the best. The 70 and tl140 have an is an isuzu.


Sent from my iPhone using Tapatalk

Levi and I are on the lookout for one..
Need to be able to dig post holes and drive pipe.