how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[cobey]

I don't understand the question Cobey.
Do you have a 254xp?

Yep, I want good port timing Numbers
For it, I was gonna adjust them if
Need be, putting in meteor piston

 

[cobey]

Yep, I want good port timing Numbers
For it, I was gonna adjust them if
Need be, putting in meteor piston

I want it to be a strong work saw

 

[cobey]

I got 2 one for 10 and one for 15 bucks

 

[67L36Driver]

36" X .404 Poulan bar was just delivered. May need a helper handle for the 655BP.

Remington SL-55 made it to Lenexa KS.[emoji12]

 

[Hedgerow]

I want it to be a strong work saw

Need the stock #'s to see what the factory was looking for.
Closed port & Dual port?
Bore x Stroke measurements?

 

[cobey]

I'll put them up when I get them
Dual port, kinda like a stihl

 

[cobey]

Need the stock #'s to see what the factory was looking for.
Closed port & Dual port?
Bore x Stroke measurements?

 

[shorthunter]

I want good port timing numbers for it

I would buy a couple of cheap pistons and grind/ file on them until you find some numbers that you like. If you go that route, I would start with 152° duration on the intake and exhaust and 18° of blowdown. Run the saw, pull it apart, file, reassemble, repeat. Set your intake first, then your exhaust and finish with your transfers

 

[cobey]

I will post numbers when
I get the piston in and my drill
Chuck on my degree wheel

 

[WKEND LUMBERJAK]

Cobey just deleting the base gasket and muff ler mod should make it a strong work saw.

 

[lumberjackchef]

Need the stock #'s to see what the factory was looking for.
Closed port & Dual port?
Bore x Stroke measurements?

This is what acres site says about stoke and bore if its correct.....

Sent from my MotoE2(4G-LTE) using Tapatalk

 

[Locust Cutter]

A 254xp might be alright then!

 

[jmssaws]

What does 254 look like fellas?

 

[Hedgerow]

What does 254 look like fellas?

 

[Gritz]

Seems like a nice saw. That one is definitely not stock, lol. I can't ever keep track of all the different Husqvarna models. There's just so many, lol.

 

[Gritz]

Got this in the mail today. Another 12 classes until I get the next one. Always something bigger to work toward.

 

[WKEND LUMBERJAK]

Congratulations , Brandon.

 

[Workshop]

You can never have too much knowledge, Brandon.
Proud of you, keep it up.

 

[Gritz]

Congratulations , Brandon.

You can never have too much knowledge, Brandon.
Proud of you, keep it up.

Thanks! I just try to take one class at a time. The Army gives me money to go to school on, so I might as well use it.

 

[Hedgerow]

Seems like a nice saw. That one is definitely not stock, lol. I can't ever keep track of all the different Husqvarna models. There's just so many, lol.

Stock saw???
Does anyone use those?


Poor bastards...