Can someone tell me about 036s please?

[Onan18]

Where did the badge go in the second pic? All absorbed by glare?

Looks original to me. There are some mid-year change saws I've seen in the 026/036 model line.

For example, @Onan18 has a metal badge decomp 026 PRO, only one I'd ever seen.

036 Have that flat top cover. All MS360 are PRO and usually have more of a bubble top cover and only a rounded model spec badge on the recoil.

Late 036 and All MS360 have a bigger airfilter and matching AF cover with a lever and not the knob your saw has.

Your saw has the more desirable rear cover, at least to me. Your saw should have a non compensating carb and the smaller airfilter. You can put the factory metal mesh filter on that saw and the saw will perform better.

Good info bud, thanks for taking the time to explain the differences.

Here's some model pics. Should be an 034S/036 early, 036 late and MS360.
View attachment 73578 View attachment 73579 View attachment 73580 View attachment 73581 View attachment 73582

Man, that 034S sure does look familiar for some reason.

 

[Wonkydonkey]

So here's my 1996 036, it has an Oregon 18" with an oregon 75LPX 1.6
I had probs with the fuel cap weeping, the tank filling holeis a bit rough so I got some neoprene washers off ebay 26mm ID 36mm OD seems to have helped

 

[dall]

So here's my 1996 036, it has an Oregon 18" with an oregon 75LPX 1.6
I had probs with the fuel cap weeping, the tank filling holeis a bit rough so I got some neoprene washers off ebay 26mm ID 36mm OD seems to have helped View attachment 73624 View attachment 73625 View attachment 73626 View attachment 73624

can you get pics of the back of the recoil at the fuel tank end

 

[p61 western]

can you get pics of the back of the donkey please?

 

[dall]

lol wrong thread mike

 

[p61 western]

lol wrong thread mike

Sorry I couldn't resist, carry on folk's.

 

[bryanr2]

I see she's sporting a "Carlton" bar.....you fellas know anything about these? Or are they a Brit make?

I've only used oregon or stihl in the past so I would not know what all the AM bars are like exactly.

My Carlton speed tip bars are rebadged windsor speed tips.

 

[MattG]

So here's my 1996 036, it has an Oregon 18" with an oregon 75LPX 1.6
I had probs with the fuel cap weeping, the tank filling holeis a bit rough so I got some neoprene washers off ebay 26mm ID 36mm OD seems to have helped

Nice looking saw you've got there. Thanks for the pics and the washer advice.

 

[Wonkydonkey]

can you get pics of the back of the recoil at the fuel tank end

Umm, I pulled it just for you,,, lol I hope this is what you wanted

 

[Wonkydonkey]

And the filter pic

 

[MattG]

Umm, I pulled it just for you,,, lol I hope this is what you wantedView attachment 73703

Anyone know how easy it is just to put a second starter pawl in right there?

 

[dall]

This style recoil ?

 

[Wonkydonkey]

Anyone know how easy it is just to put a second starter pawl in right there?

From the ipl simple fix I guess ?
2 pawls and a new spring
No 11, 1125 195 7200 this being pawls x2
No12 1128 195 3500 and this being the spring.

Edit: this maybe of intrest, it seems to be the same part for all sorts things.
https://www.ebay.co.uk/i/1224047198...3D710-134428-41853-0%26rvr_id%3D1230384291670

 

[Wonkydonkey]

View attachment 73719

This style recoil ?

View attachment 73719

This style recoil ?

Yeh it is, sorry I was being dumb, lol

 

[huskihl]

Yeh it is, sorry I was being dumb, lol

Maybe kinda Wonky, but not dumb......

 

[Backtroller]

First is a 036pro 034AV non super model

 

[Backtroller]

Is a 034Super recoil like the non super?

 

[huskihl]

Is a 034Super recoil like the non super?

Mine is.

 

[stihldragon86]

I've got an 024woodboss I love the older saws

Sent from my SM-S120VL using Tapatalk

 

[Backtroller]

Mine is.

For some reason I like that one better.