And now for something completely different.

[cus_deluxe]

so here is where it sits now.

 

[cus_deluxe]

basically gotta figure out a kill switch. then in theory it should be ready for a run this wknd.

 

[Red97]

Mini 10 Amp Rocker Switch Single Pole Single Throw SPST Off- Momentary On | eBay

Popular sized mini Rocker Switch. Black body and button.

www.ebay.com

This should fit just right in the old multiposition spot.

 

[cus_deluxe]

Great thread Cus. Porting looks great.

thanks doc!

 

[cus_deluxe]

Mini 10 Amp Rocker Switch Single Pole Single Throw SPST Off- Momentary On | eBay

Popular sized mini Rocker Switch. Black body and button.

www.ebay.com

This should fit just right in the old multiposition spot.

sweet ill check those out. i had something a lot less elegant in mind

 

[czar800]

yeah, that 50 with the hs carb and dallys pipe ran pretty good. cant believe piston didnt melt, ran that fugger hot

That poor plastic decompress knob was Maxed out…
Great thread!

 

[sawmikaze]

this saw will be really lightweight, u probly wont be interested.

Thanks for the reply, cuthter.

 

[cus_deluxe]

That poor plastic decompress knob was Maxed out…
Great thread!

lol! that was the 181, but yeah, melted that fukker right off! i make my own rules bro.

 

[srcarr52]

a little of our favorite 2 part epoxy and some masking tape. i always like to give it some gentle heat to loosen the epoxy, helps air bubbles to make their way out.
View attachment 370441View attachment 370440

I’ve turned a plug and pounded it in or ditch cut and welded it in before.

The slight upward angle didn’t seem to hurt anything but I could see it starving the bearings of fresh oil a bit.

 

[cus_deluxe]

I’ve turned a plug and pounded it in or ditch cut and welded it in before.

The slight upward angle didn’t seem to hurt anything but I could see it starving the bearings of fresh oil a bit.

i had that thought about the bottom end not getting fresh oil…itll be research and stuff… haha

 

[cus_deluxe]

I’ve turned a plug and pounded it in or ditch cut and welded it in before.

The slight upward angle didn’t seem to hurt anything but I could see it starving the bearings of fresh oil a bit.

another pic that better illustrates what happenin

 

[cuinrearview]

Bump

 

[redline4]

I bet this bish is gonna cut like lightning...

 

[cuinrearview]

I bet this bish is gonna cut like lightning...

Maybe even perform like it.

 

[cus_deluxe]

gotta actually work today. and wife has the rona so im probly not gonna be able to get anywhere on this until saturday. thankfully were supposed to get 3-5” snow and 40 mph winds. bout fukkin done with that.

 

[cuinrearview]

gotta actually work today. and wife has the rona so im probly not gonna be able to get anywhere on this until saturday. thankfully were supposed to get 3-5” snow and 40 mph winds. bout fukkin done with that.

Can't like that. I guess we'll have to keep the thread warm for you until then, slacker.

So how many selfie sticks do guys own, and which one is your favorite?

 

[Wonkydonkey]

I bet this bish is gonna cut like lightning...

Maybe even performanance like it.

That’s if don’t disappear in a (insert excuse here)

 

[cus_deluxe]

got done a little early. worked with a buddy cuttin some pine trees. he digs my ported oe 346


he was able to do the pine in the background and all the limbing and chunks in the foreground on one tank of fuel. pretty good mileage i think.

 

[Ketchup]

Ported 42mm gets it done. Love mine.

 

[cus_deluxe]

Ported 42mm gets it done. Love mine.

yeah he doesnt even wanna use his 550s anymore