WHATS YOUR PICK FOR SAWS AROUND 100CC?

[srcarr52]

Not sure how much compression or timing advance you put in my 2100. But it is rather easy to pull over. (Easy for 100 cc anyway)

Only 0.010" out of the squish and no timing advance. You can put some in if you'd like but they run higher RPM without ignition advance.

 

[Deets066]

That a 32" or 36"

32"

 

[Deets066]

Only 0.010" out of the squish and no timing advance. You can put some in if you'd like but they run higher RPM without ignition advance.

It runs pretty damn good as is, I see no reason to change it

 

[Deets066]

Both those saws look good, the wood isn't doin them saws any justice though

 

[Moparmyway]

@Darin, I have just been informed that I have mistaken you for someone else.

I'll say that your response to post #282 caused me to believe that you were a different Darin

I apologize to you and this forum for post #282 and #288.

 

[hseII]

@Darin, I have just been informed that I have mistaken you for someone else.

I'll say that your response to post #282 caused me to believe that you were a different Darin

I apologize to you and this forum for post #282 and #288.

Very Classy Sir.

 

[Darin]

@Darin, I have just been informed that I have mistaken you for someone else.

I'll say that your response to post #282 caused me to believe that you were a different Darin

I apologize to you and this forum for post #282 and #288.

I signed up with Arborist Site a few months back. I googled some info about an 075 and it led to A.S. One of the comments was how a guy and his 066 would walk all over the 075. I replied in a unprofessional manner and another member replied to me that I need to go back down into my mothers basement. In turn I replied that in fact I was at his mom's and on top of her. Kinda of a *s-wordty thing to say but don't piss me off cause I'm crazy as a *s-word house rat. Somehow that ended up posting to @sawfun which I was engaged in the 075 conversation. Not professional and not respectful but I'm a dick and that's that...sorry @ sawfun. It ended up in a huge *s-word storm and later selling a Mac Super 797, I made more friends. A guy lowballed me 50 bucks for my 797 and it pissed me off. Some guy named Bill H pissed me off and he got drug into it. I decided to look for a different saw site and wound up here. I quickly inherited the nickname Jack Knob, and Prick from @Jon1212, but he calls a spade a spade and I respect that. My apologies to @sawfun and any others that feel I overstepped any boundaries. @Lee H thanks for the call last nite. I like what another member posted that he said he likes to come here to read posts, laugh and have a good time, and I couldn't agree more. I have a sarcastic prick sense of humor and people that know me realize that I'm just being me and I truly mean no harm.

 

[T.Roller]

Alright I'm back. Everyone kiss and make up?

 

[Jon1212]

Alright I'm back. Everyone kiss and make up?

Next time, warn us when you're gonna be gone. We'll appreciate it more.

 

[Wolverine]

Alright I'm back. Everyone kiss and make up?

Glad to hear it...

 

[T.Roller]

Next time, warn us when you're gonna be gone. We'll appreciate it more.

Lol I did but no one noticed

 

[Iron.and.bark]

I've never run any big Solo or even seen a 690. I sure hope to some day as Bob has a 603 for the gtg and hopefully Sheldon gets his super Rex done in time.

I am dolmar biased, but the solo 690 is my favorite 90cc saw. Was very popular in my neck of the woods and you need dynamite to make anyone who has one part with it. 603 is less responsive and more lumbering, probably due to the removable ports. It is mean though, more muscle saw.

 

[Toad22t]

Lol I did but no one noticed

Don't worry I noticed if it makes you feel any better. I just didn't give a *f-word!

 

[T.Roller]

Don't worry I noticed if it makes you feel any better. I just didn't give a *f-word!

I don't give a *f-word either so we have something in common

 

[Toad22t]

I don't give a *f-word either so we have something in common

Touche!

 

[T.Roller]

Touche!

 

[Deets066]

I signed up with Arborist Site a few months back. I googled some info about an 075 and it led to A.S. One of the comments was how a guy and his 066 would walk all over the 075. I replied in a unprofessional manner and another member replied to me that I need to go back down into my mothers basement. In turn I replied that in fact I was at his mom's and on top of her. Kinda of a *s-wordty thing to say but don't piss me off cause I'm crazy as a *s-word house rat. Somehow that ended up posting to @sawfun which I was engaged in the 075 conversation. Not professional and not respectful but I'm a dick and that's that...sorry @ sawfun. It ended up in a huge *s-word storm and later selling a Mac Super 797, I made more friends. A guy lowballed me 50 bucks for my 797 and it pissed me off. Some guy named Bill H pissed me off and he got drug into it. I decided to look for a different saw site and wound up here. I quickly inherited the nickname Jack Knob, and Prick from @Jon1212, but he calls a spade a spade and I respect that. My apologies to @sawfun and any others that feel I overstepped any boundaries. @Lee H thanks for the call last nite. I like what another member posted that he said he likes to come here to read posts, laugh and have a good time, and I couldn't agree more. I have a sarcastic prick sense of humor and people that know me realize that I'm just being me and I truly mean no harm.

Some of us are here because of a douche bag named Darin, it has all worked out for the better.

But you came off sounding like him and given his history......

Hopefully no ill feelings and you enjoy the site

 

[Redfin]

Darin and Kevin, thank you both for stepping up to the plate like Men.

Now back to da saws.

I am dolmar biased, but the solo 690 is my favorite 90cc saw. Was very popular in my neck of the woods and you need dynamite to make anyone who has one part with it.

This one I thought would be a better runner with the quads. All Ive done so far is set squish and mm. It will get ported at some point.

 

[Lee H]

Okay, Now that all the kissin and huggin is over. Here is a
good pick for a 100cc saw. 103cc's actually. This will make
a man outta ya. Got to be the cleanest Mcculloch 940 out
there.

 

[Lee H]

This Pioneer 850 i restored a year or so ago. 107cc's and will
pull long bars with 1/2 pitch chain. No girly saw here.