What's on your bench?

[EFSM]

The Stihl TS400 are so easy to work on compared with their new trash. Big great Tillotson carburetor too, not the trash Zama strato carbs like the 420. This got a tuneup, new metering diaphragm and lever adjustment, and clutch springs.

 

[Kdrweld]

Next up to bat, a gently used Farmsaw

 

[Czed]

Niece's RAV4 is pushing 300k
Lost most power and a severe misfire for some reason
Couldn't imagine why
Neither she or her husband had ever changed the sparkplugs
Oil yes plugs no

The neighbor's are hoarder's

 

[Shane¹]

Got the 350 cylinder porting finished and cylinder bolted down today.
Got to do the timing advance, muffler mod and see if it will run

 

[Sloughfoot]

Got the 350 cylinder porting finished and cylinder bolted down today.
Got to do the timing advance, muffler mod and see if it will run

View attachment 478218

Had my sights on building and porting a 350 till I noticed the cases are plastic. You've got me reconsidering it.

 

[South_Prairie_Saw]

#1 and #2 just getting a little clean up

 

[hacskaroly]

Worked on my Husky 365/372 conversion today. The bearings and oil seals came in the mail yesterday, cut out a new case gasket today and got quite a bit of it reassembled. This was the first time I put one of these saws back together with the muffler and the carb attached to the jug and put it back on the piston all at once, it was a lot easier than I expected! Was working on getting the new tank/handle reconnected when I had to stop for the evening.

I was also working on an 034 for a friend, he broke the oiler. Not sure what he did, but he snapped the tip off of the oiling rod and then popped the rest of the rod off of the worm gear, bent up the plastic threads and the metal threads on the oiler. I have a new oiler to put in, but don't have the oil line. Tried to reuse the old line, but it appears to have been heat-shrunk on there, won't come off without destroying it. Was going to see if the local shop had one, but forgot they closed at noon on Saturday.

 

[South_Prairie_Saw]

Worked on my Husky 365/372 conversion today. The bearings and oil seals came in the mail yesterday, cut out a new case gasket today and got quite a bit of it reassembled. This was the first time I put one of these saws back together with the muffler and the carb attached to the jug and put it back on the piston all at once, it was a lot easier than I expected! Was working on getting the new tank/handle reconnected when I had to stop for the evening.

I was also working on an 034 for a friend, he broke the oiler. Not sure what he did, but he snapped the tip off of the oiling rod and then popped the rest of the rod off of the worm gear, bent up the plastic threads and the metal threads on the oiler. I have a new oiler to put in, but don't have the oil line. Tried to reuse the old line, but it appears to have been heat-shrunk on there, won't come off without destroying it. Was going to see if the local shop had one, but forgot they closed at noon on Saturday.

Man I really need to get it together and get a 372 to add to the pile. I need to add more dark orange to the mix!

 

[hacskaroly]

Man I really need to get it together and get a 372 to add to the pile.

I have a 272 and a 2100 and really like them. I just recently bought a 365 project saw (busted case and fuel tank) for about $100. I really like the 2 series, hadn't planned on getting a 3 series, but happy to take it on as a project.

 

[South_Prairie_Saw]

I have a 272 and a 2100 and really like them. I just recently bought a 365 project saw (busted case and fuel tank) for about $100. I really like the 2 series, hadn't planned on getting a 3 series, but happy to take it on as a project.

I’ve been in the stihl bandwagon for so long, but I am really trying to get into all saws and not really be “brand biased”. I ALMOST went and grabbed a 2100 for $450 the other day as there is something about those that I really like. My stock 550 is an animal and I think gave my buddy buyers remorse about his 261 and the 372 would be nice to have with the 440.

346XP has been on my watchlist forever, but they don’t seem to pop up around here too often