What's on your bench?
- Thread starter Adirondackstihl
- Start date
Ronie
Here For The Long Haul!
That would be nice to have.
Johnmn
Here For The Long Haul!
- Local time
- 9:35 PM
- User ID
- 908
- Joined
- Feb 18, 2016
- Messages
- 3,395
- Reaction score
- 12,173
- Location
- Minnesota
Gonna be $675 plus shipping let me know if your interested otherwise I'm gonna post it up for sale today. Started on the third pull yesterday. It's not mint but the price reflects that.
bigbadbob
Here For The Long Haul!
- Local time
- 7:35 PM
- User ID
- 454
- Joined
- Jan 9, 2016
- Messages
- 1,901
- Reaction score
- 12,369
- Location
- Interior BC Canada
2171 from FB auction, guy said his kid has been trying to get it going for a while. Not scored on ex side,,, will dig into it.
Missing some parts 80psi. Was cheep nuff,,,
Missing some parts 80psi. Was cheep nuff,,,
bigbadbob
Here For The Long Haul!
- Local time
- 7:35 PM
- User ID
- 454
- Joined
- Jan 9, 2016
- Messages
- 1,901
- Reaction score
- 12,369
- Location
- Interior BC Canada
Tore into the 2171
whats this slug outta??
Look like saw ate a ring at one time,, never got cleaned.
Jug is fubar,, lotsa other incorrect stuff.
Slug has a divot,, its also seen sandpaper as the jug base has to
whats this slug outta??
Look like saw ate a ring at one time,, never got cleaned.
Jug is fubar,, lotsa other incorrect stuff.
Slug has a divot,, its also seen sandpaper as the jug base has to
- Local time
- 10:35 PM
- User ID
- 568
- Joined
- Jan 17, 2016
- Messages
- 32,146
- Reaction score
- 182,517
- Location
- Wv
I've never seen that type piston before.
- Local time
- 9:35 PM
- User ID
- 13535
- Joined
- Aug 17, 2020
- Messages
- 3,633
- Reaction score
- 20,470
- Location
- Neenah Wisconsin
Piston looks like someone chamfered the crown to increase exhaust & transfer duration. Looks like they might have bead blasted the crown as well since the machine marks are barely noticeable.
bigbadbob
Here For The Long Haul!
- Local time
- 7:35 PM
- User ID
- 454
- Joined
- Jan 9, 2016
- Messages
- 1,901
- Reaction score
- 12,369
- Location
- Interior BC Canada
- Local time
- 10:35 PM
- User ID
- 568
- Joined
- Jan 17, 2016
- Messages
- 32,146
- Reaction score
- 182,517
- Location
- Wv
- Local time
- 9:35 PM
- User ID
- 12238
- Joined
- Apr 13, 2020
- Messages
- 2,266
- Reaction score
- 13,426
- Location
- 5543X, 5644X
The Mac 10-10A is finally starting and running how is expected. The seal on the PTO side was replaced (was hard and may have had a split) and the points were dressed and set to 0.019" in the most recent tinkering's.
A couple of items still need attention, fuel tank has slight gasket seepage, and I would like to reduce the chain oil loss from the cotter key, it's a bit messy for my liking.
A couple of items still need attention, fuel tank has slight gasket seepage, and I would like to reduce the chain oil loss from the cotter key, it's a bit messy for my liking.
Spike60
Here For The Long Haul!
- Local time
- 10:35 PM
- User ID
- 835
- Joined
- Feb 8, 2016
- Messages
- 1,927
- Reaction score
- 16,535
- Location
- Ulster County, NY
Farmin is on the right track. Idea is to cut the piston to compensate for cutting the base so ports aren't restricted. Some place out west did a lot of that. Madsen's maybe?
- Local time
- 9:35 PM
- User ID
- 714
- Joined
- Jan 28, 2016
- Messages
- 2,832
- Reaction score
- 19,001
- Location
- Dike, Iowa
Needs a litle cleanup.
Mark
Mark
- Local time
- 10:35 PM
- User ID
- 568
- Joined
- Jan 17, 2016
- Messages
- 32,146
- Reaction score
- 182,517
- Location
- Wv
Out of 12 saws I got from a guy to fix 5 have been scored 
I'm working on two ms290s one I'll make into a 390 with a am kit and the other I'm putting a duke's piston in the oem cylinder
I'll run them side by side to see which is stronger.
Here's his 455 rancher he gave it to me I ordered a duke's popup for it.
I already rebuilt a 372 and 394 and returned them to him
I just leave them on his porch when I'm done
Either him or his workers don't like to mix fuel and oil.
I'm working on two ms290s one I'll make into a 390 with a am kit and the other I'm putting a duke's piston in the oem cylinder
I'll run them side by side to see which is stronger.
Here's his 455 rancher he gave it to me I ordered a duke's popup for it.
I already rebuilt a 372 and 394 and returned them to him
I just leave them on his porch when I'm done
Either him or his workers don't like to mix fuel and oil.
bigbadbob
Here For The Long Haul!
- Local time
- 7:35 PM
- User ID
- 454
- Joined
- Jan 9, 2016
- Messages
- 1,901
- Reaction score
- 12,369
- Location
- Interior BC Canada
Yard sale 261 former power company saw. Somebody ran it while with the brake on.
Had to replace the clutch drum (cracked and galled ) ,bearing , and oiler driver, oiler cover all melted.
Saw is a bit beat up from riding in a truck. Slug is as new 155 comp.
It cleaned up good,, waiting for parts.
Came with bar an 2 chains one new.
No *b-wordin was cheep 2011 saw.
Some other goodies in the crate as well
Seller may have another saw later,
Had to replace the clutch drum (cracked and galled ) ,bearing , and oiler driver, oiler cover all melted.
Saw is a bit beat up from riding in a truck. Slug is as new 155 comp.
It cleaned up good,, waiting for parts.
Came with bar an 2 chains one new.
No *b-wordin was cheep 2011 saw.
Some other goodies in the crate as well
Seller may have another saw later,
Last edited:
thedude74
Bonafide & Stuff !!!
- Local time
- 7:35 PM
- User ID
- 3254
- Joined
- May 23, 2017
- Messages
- 787
- Reaction score
- 2,774
- Location
- Alaska
Echo CS4910
Worlds easiest muffler mod. Two Phillips screws, remove the restrictor, opened up the deflector with grinding bur, screwed it back on and a quick retune. Didn't even have to pull the muffler.
Worlds easiest muffler mod. Two Phillips screws, remove the restrictor, opened up the deflector with grinding bur, screwed it back on and a quick retune. Didn't even have to pull the muffler.
