What's on your bench?

[TJ the Chainsaw Mechanic]

You can get the parts to rebuild the pump

Ended up being some crap on the rod causing it to bind.

 

[Cobby08]

Just had a 441 with about 20 hours on it come in for crappy starting and power. Checked fuel filter. Looked right color. Tried to fire up. It would run fine for about 10 seconds then run out of fuel. Tore into the carb and found the screen plugged flush. Pressure tested fuel line to see if it was torn. No tear but upon removal of the filter found the filter was cracked allowing *s-word in... Wtf...


Sent from my iStump using Tapatalk

 

[Cobby08]

Sent from my iStump using Tapatalk

 

[VinceGU05]

View attachment 18759 View attachment 18760 View attachment 18761 View attachment 18762 View attachment 18763 A sparkly 084 av after a service and a sharpen....big old lump !
On the other bench..a Poorly Dolmar 9010 after a strip and vac/pressure testing. Passed.
Dont do many 90..120cc saws, then 2 come along at once

THATS A BEAUTIFUL LOOKING 084 !!!

 

[VinceGU05]

Just had a 441 with about 20 hours on it come in for crappy starting and power. Checked fuel filter. Looked right color. Tried to fire up. It would run fine for about 10 seconds then run out of fuel. Tore into the carb and found the screen plugged flush. Pressure tested fuel line to see if it was torn. No tear but upon removal of the filter found the filter was cracked allowing *s-word in... Wtf...


Sent from my iStump using Tapatalk

i had a similar thing of a solo 667.. lucky i had a look thru the IPL and saw it runs 2 filters in the tank, as there was only one in the tank when i checked.. sure enough it had been sucking up thru the missing filter port and blocked solid the mesh inside the carby. cleaned it and ran like a cut cat.. saved from the dumpster from whenist it came.

Finished modding a MS390.

Now onto doing the same to his mates MS460. I can see why you guys love to dp these saws ( Aussie saws come dp)
How the heck is it meant to breathe thru that pissy little 7.5mm hole!! A stock MS390 has a bigger opening!



Going to end up like this.



The back hole is stock Aussie. And the front cover opening is twice the width from stock.

 

[Tor R]

Wiring day:

 

[czar800]

 

[Redfin]

Finished porting my 661 this am. Gonna do a good test with adjustable carb vrs mtron.

 

[Tor R]

Took me a long time, but this baby is now up and going, left to do some real cutting work tomorrow.
346 xpg oe 07 week 15, no gasket, hda 199 carb, full rebuild, I have spend 170$ in total for the saw and parts, cheap I think.
I had in mind to do some of the same porting as I did on an 2147 WH and keep the saw for the collection, but it seems I will swap it for something else on monday, kinda sad to let this 346 oe go.....

 

[Simondo]

Took me a long time, but this baby is now up and going, left to do some real cutting work tomorrow.
346 xpg oe 07 week 15, no gasket, hda 199 carb, full rebuild, I have spend 170$ in total for the saw and parts, cheap I think.
I had in mind to do some of the same porting as I did on an 2147 WH and keep the saw for the collection, but it seems I will swap it for something else on monday, kinda sad to let this 346 oe go.....
View attachment 19023

A thing of beauty !! Im Green

 

[exSW]

Wiring day:
View attachment 19006

More

 

[SteveSS]

Great looking saw, Tor.

 

[Tor R]

Great looking saw, Tor.

thanks, I somehow hope I can finish one of my 346 xpg OE's 06 models before the swap deal, this guy doesnt care about the outside look, both those 346's are equal this one inside. Lack of parts so I may just has to let it go

 

[TJ the Chainsaw Mechanic]

MS210 with a bad attitude, and an MS230C that I started, but never got to dig into.

 

[czar800]

 

[Simondo]

This little lot ...serviced and ready to go. Solid saw that 036 av supper...not as easy in the clutch department to work on than the ms 361 , but this one is nicely treated.

 

[Tor R]

More

I never liked the way the wiring on 262 xpg are, from fuel tank to crankcase, to sloopy, black spacer comes from an old fuel hose. Doubt the wiring will move anyway now.

 

[Onan18]

A 338XPT that needs a fuel line and has that stupid always leaking Auto Deco.

 

[Sty57]

Picked this one up today. Will have to give it a good once over. But it starts and runs, so that's a plus.

 

[mdavlee]

850 pro Mac?