What's on your bench?

[Canadian farm boy]

Your mix red?

Amsoil saber is blue and has fuel stabilizer. Iirc, amsoil dominator is a red/purple colour and it doesn't have any fuel stabilizers in it.

 

[dustinwilt68]

Blue oil ftw, I use Honda hp2, been great for me.

 

[Red97]

Amsoil saber is blue and has fuel stabilizer. Iirc, amsoil dominator is a red/purple colour and it doesn't have any fuel stabilizers in it.

Thank you for the info on the dominator.

He had ran a tank through the saw yesterday, still had a bit of red oil in the crankcase. Figure he probably runs 50:1

Just told me amsoil and 93 for mix.

Once I pulled it down
Knew it couldn't be saber, seen the dominator bottle cap was red, assuming the oil was too. Guess running gallons a day every day stabilizer isn't an issue.

 

[huskyboy]

Your mix red?

Blue saber 40:1, never tried dominator but thought about it. Not sure what color dominator is.

 

[XP_Slinger]

Blue saber 40:1, never tried dominator but thought about it. Not sure what color dominator is.

Dominator is red, or at least it was 8 years ago when I ran it in my 250R.

 

[bigbadbob]

This needed a new o ring on the float bowl, somebody farked the old one, pilot jet was plugged, gen was hunting. The pilot jet has a tiny hole,, I used a torch to get it cherry red then compressed air to clean it.
The o ring cost more than I paid for the unit. This is a net pic, mines a bit cleaner,,, takes 100/1 mix,, probably use red armour,,

 

[XP_Slinger]

Got my friends 371 put back together today. Running great and holding its tune. Just have to pick up the carb isolator rubber piece that holds the filter elbow and I’ll be giving it back to him for a torture test. Oh and I’ll be giving it back to him tuned a tad rich, he said he’s never touched the jets since he bought it in 1998. Oh boy

 

[Spike60]

Bob you don't happen to have seals and bearings sitting in the back by chance?

Nope. Took a look in a couple of boxes I hadn't gone through yet, but nothing there.

 

[Tor R]

Long project, not because it was a complicated one, more that I don't priority them 346/353's. Low hour saw got the normal service parts + part wall w/clamp. A buddy of me have shown interest to purchase her and that is probleby how it will end +(my wife will be super happy to hear that I'm not addicted to my saws ) (there are more to come soon )

 

[bigbadbob]

Long project, not because it was a complicated one, more that I don't priority them 346/353's. Low hour saw got the normal service parts + part wall w/clamp. A buddy of me have shown interest to purchase her and that is probleby how it will end +(my wife will be super happy to hear that I'm not addicted to my saws ) (there are more to come soon )

View attachment 110338

Thats too big of a saw for over there,,, you need to box it up and send it overseas,,, like to my house!!

 

[Tor R]

Thats too big of a saw for over there,,, you need to box it up and send it overseas,,, like to my house!!

yeah, right, I guess it wouldnt go long time before a new 346 top end came on her
They actually sold many of those 353's in Norway, 345, 353 and 346 xpg was the big sellers, 350 not so much.

After 545 and 550 xpg arrived they had campaigns to empty the stocks of 353/346's, I still remember they offered us 353G or 346XP for the same price dump, same with JRed models

 

[Moparmyway]

You’d never guess in a million years

 

[Dub11]

You’d never guess in a million years
View attachment 110368 View attachment 110369

What did It?

 

[mikerudder]

My first huskys to tear into ($75 CL find)
I’m a Stihl guy but couldn’t say no!
365 special- needs a top end and some TLC (top cover, tank repair or replace, smalls etc)
61- running, needs a chain brake band and some smalls
254 - will run with fuel poured into the carb - needs fuel system work and a clutch cover/chain brake

 

[Moparmyway]

What did It?

Ummmmm
That should be obvious Sir, as should the “who did it” question

 

[Dub11]

Ummmmm
That should be obvious Sir, as should the “who did it” question

I was thrown off by the squish band. It looks smooth. The ones I've seen look like a hammer drill was used.

 

[Moparmyway]

I was thrown off by the squish band. It looks smooth. The ones I've seen look like a hammer drill was used.

With enough practice, a pile of monkey crap could look like cutting edge art

Please allow me to digress, pictures of said swuish

 

[drf256]

With enough practice, a pile of monkey crap could look like cutting edge art

Please allow me to digress, pictures of said swuish
View attachment 110372 View attachment 110373 View attachment 110374

Strap-On did Work that’s just unbelievable.

Sanded that band with some rotary sander. Not sure that jug is worth fixin, but it would be interesting to find out.

Any sanding marks on the base?

 

[Moparmyway]

Strap-On did Work that’s just unbelievable.

Sanded that band with some rotary sander. Not sure that jug is worth fixin, but it would be interesting to find out.

Any sanding marks on the base?

Of course


As well as booger marks on the case


And ........
It wouldn’t be complete without the allways present crooked base




Of course its out side to side ......... why wouldn’t it be ?

 

[Onan18]

Of course
View attachment 110383

As well as booger marks on the case
View attachment 110387

And ........
It wouldn’t be complete without the allways present crooked baseView attachment 110389
View attachment 110388



Of course its out side to side ......... why wouldn’t it be ?

Belt sander bandit strikes again.

Need parts Kevin?