What's on your bench?

[MS290man]

Here's the MS271 I bought off eBay. PO straight gassed it. Doesn't even look like it was used to cut anything. Cylinder was salvageable and I scored a new OEM piston off eBay as well (bought before I disassembled the saw). Rebuild was going well until I noticed the piston looked different than the one that came out. Got on the board here who helped me to realize that I actually had a newer version and that they had changed the internals. So it sits here waiting for the new, correct piston to show up at the dealer; 2.5 week back order.

So I went ahead and replaced the cylinder and piston on a MS250 that I had previously got running but only had 110 psi compression. 170 psi now...

 

[MS290man]

Here's the MS271 I bought off eBay. PO straight gassed it. Doesn't even look like it was used to cut anything. Cylinder was salvageable and I scored a new OEM piston off eBay as well (bought before I disassembled the saw). Rebuild was going well until I noticed the piston looked different than the one that came out. Got on the board here who helped me to realize that I actually had a newer version and that they had changed the internals. So it sits here waiting for the new, correct piston to show up at the dealer; 2.5 week back order.

So I went ahead and replaced the cylinder and piston on a MS250 that I had previously got running but only had 110 psi compression. 175 psi now...

Pics of 250

 

[jeepsnchainsaws]

I make my own gaskets most of the time too
It's looking great

Nice job on the gaskets.

Thank fellas!
I am excited to get it together and fire it up so I can tear it back down for paint

 

[T.Roller]

Time to learn....

 

[cease232]

Time to learn....View attachment 53487

Whatcha learnin on?


Sent from my iPhone using Tapatalk Pro

 

[T.Roller]

Whatcha learnin on?


Sent from my iPhone using Tapatalk Pro

I believe my first victim will be a 044

 

[dall]

I believe my first victim will be a 044

10 or 12 ?

 

[T.Roller]

10 or 12 ?

10 mm top end

 

[dall]

10 mm top end

gws 10mm o44 lol

 

[Czed]

I believe my first victim will be a 044

Fabztastic

 

[Czed]

Time to learn....View attachment 53487

Nice setup man.

 

[exSW]

Taxes. That's what's on my bench.

 

[T.Roller]

Nice setup man.

Thank you sir

 

[Czed]

Taxes. That's what's on my bench.

Don't payem that's what Wesley snipes did lol

 

[T.Roller]

Now I have to find time to learn

 

[Czed]

I'm just muff modding a chinese 58cc saw not on a bench but my new grill i haven't assembled yet.

 

[T.Roller]

I'm just muff modding a chinese 58cc saw not on a bench but my new grill i haven't assembled yet.View attachment 53494

I'm digging that muffler the way it is

 

[Czed]

By the way those cheap walmart bastich impact and 1/2 inch drills are good three years two metal roofs thousands of sheetrock screws same battery's too.

 

[Czed]

I'm digging that muffler the way it is

Too much internal restriction i'm tired of loud saws just working inside this one.

 

[exSW]

Don't payem that's what Wesley snipes did lol

I don't have the years to piss away in prison like I used to.