What's on your bench?

[TJ the Chainsaw Mechanic]

Currently working on an 09 arctic cat 1000 prowler. Customer let the machine sit for a long period of time from what it looks like. Well, old gas rotted the fuel pump's filter out and ruined the pump as well. Wouldn't push more than 25 PSI, and it took awhile to get there. Ordered up a new pump.....$670 later....and put it in.....sucker breaks the tire loose every time. haha Now to finish the service and it's on consignment. Only 300 miles on it to.

 

[Stackowood]

A fairly clean MS250 waiting for parts. Ice and snow shut down all of our UPS and FedEx deliveries for a couple of days.

 

[Stackowood]

T435 waiting for an intake boot. Pretty easy saws to work on and they have good power if you open up the exhaust and intake.

 

[Tpagel]

Jonsered 2149

Going to check squish and read up on where to set the timing it is a 45mm jug with removable transfers.
How aggressive can a guy without a lathe go?


Sent from my iPhone using Tapatalk

 

[rattler]

Jonsered 2149

Going to check squish and read up on where to set the timing it is a 45mm jug with removable transfers.
How aggressive can a guy without a lathe go?


Sent from my iPhone using Tapatalk

I can turn your cylinder if you need it done.

Sent from my SM-G935V using Tapatalk

 

[jmssaws]

Nice looking saw there Jason, did you port it? Vids???

 

[Keith Gandy]

041 Farmboss

 

[huskihl]

041 FarmbossView attachment 50624

That'll leave a mark on your bench....

 

[MustangMike]

Got another MS460 running today, only one left to go. (the crushed one will not be fixed here, it will take a ride to TN to amuse someone's Grandson). I discovered today the flywheel side of the case was cracked, could not see it till you removed the coil.

Already got 6 of the 8 non running saws running, and if I can make it 7 I'll be happy. A lot of clean up and maintenance on them, they were worked hard and put away wet! Lots of saw dust past the air filters, worn out chain sprockets (some literally cut in half), broken & missing bolts, etc.

But I did learn something today. Ya don't piss rev a saw that has a clutch, but no clutch drum! Good thing I caught on before there was any damage! Lots of parts are on order.

 

[jmssaws]

Got another MS460 running today, only one left to go. (the crushed one will not be fixed here, it will take a ride to TN to amuse someone's Grandson). I discovered today the flywheel side of the case was cracked, could not see it till you removed the coil.

Already got 6 of the 8 non running saws running, and if I can make it 7 I'll be happy. A lot of clean up and maintenance on them, they were worked hard and put away wet! Lots of saw dust past the air filters, worn out chain sprockets (some literally cut in half), broken & missing bolts, etc.

But I did learn something today. Ya don't piss rev a saw that has a clutch, but no clutch drum! Good thing I caught on before there was any damage! Lots of parts are on order.

I did that one time with a 143 dolmar and threw one shoe through the roof of the shop. Lost it and the spring.
Never have found either.

 

[fearofpavement]

Got the oil pump fixed on this dolmar i get the feeling the guy that gave it to me is right handed can you see the teeth.
View attachment 50384 View attachment 50385

It could also be the result of damage that only occurred on one side. I've had that.

 

[X 66 stang347 X]

I hardly run a husky but I reved one with the bar off not long ago and the clutch hit the floor and took off. Out the shop door it went and up the hill then into the sunset. Damn that *b-word was moving

 

[jmssaws]

I hardly run a husky but I reved one with the bar off not long ago and the clutch hit the floor and took off. Out the shop door it went and up the hill then into the sunset. Damn that *b-word was moving

Ive also done that on my bench but it got against the wall and spun

 

[fearofpavement]

When my heirs empty out my shop someday, they'll find those carb springs, piston circlips, clutch parts, small nuts, carb screens and other missing items that are in there somewhere.

 

[maulhead]

Had a ms460 on my kitchen table last night, needed to put a few parts on it, that came in at the dealer, so it would be ready for it's trip to TN.

 

[MustangMike]

Nice looking saw. Are you putting in a new tank vent?

 

[big t double]

Nice looking saw. Are you putting in a new tank vent?

What for? Looks like it will vent pretty damn good the way it is.

 

[maulhead]

Nice looking saw. Are you putting in a new tank vent?

Yes, I bought it from a tree company, piston is scored, guy would not give me a straight answer, but I think it was straight gassed.

They put it on a shelf and then robbed all kinda's of small parts off on it, tank vent was one thing, mufflers screws, and few other odds & ends.

It's a clean saw. Judging from the way the rest of the saw looks, I don't think it has much time on it. It still has some of the sticker on the front of the case.

Will see what it's like when it gets back from Randy's?

 

[maulhead]

What for? Looks like it will vent pretty damn good the way it is.

LMAO, yes I think it wood vent really well.....

 

[Onan18]

This little guy is going to be a farm warming gift for a friend of mine. The last place she moved onto she cleared 35 acres by hand with a machete.