What's on your bench?

[Glock37]

Shipping to your local boat shop as a Swedish anchor?

Im a stihl guy but had to what the fuss was about with these !


Sent from my iPhone using Tapatalk

 

[Onan18]

Got the ratty old 930 back together. Fresh bearings,seals and Piston/rings. Fired right up and she sounds great. Will make a chain for it tomorrow, get her tuned and in some wood.

Great, you got my saw done! Just let me know what the damage is and I will dispose of that obsolete Swedish doorstop for you.

Joe

 

[beaglebriar]

Great, you got my saw done! Just let me know what the damage is and I will dispose of that obsolete Swedish doorstop for you.

Joe

Can't wait to cut some wood with it.

Gonna play around with it tomorrow then I'll get it boxed up and shipped out to you. Lol

 

[mdavlee]

Can't wait to cut some wood with it.

Gonna play around with it tomorrow then I'll get it boxed up and shipped out to you. Lol

Those are good running saws. Lots of compression usually.

I hated the early Polaris atvs. Suzuki king quad took more of a beating than it should have and kept going.

 

[beaglebriar]

Those are good running saws. Lots of compression usually.

I hated the early Polaris atvs. Suzuki king quad took more of a beating than it should have and kept going.

I haven't checked the comp yet but it takes a healthy yank on the rope to get it fired up.

 

[mdavlee]

I haven't checked the comp yet but it takes a healthy yank on the rope to get it fired up.

The one I traded Awol was 180 or something like that on a new piston.

 

[Redfin]

do tell .....

I was just chatting with Dr Al today about this. I have tried 14* in a hybrid I built. Granted this is not the same case volume vrs jug size as a 50mm saw but it liked a bit more bd.

 

[angelo c]

I was just chatting with Dr Al today about this. I have tried 14* in a hybrid I built. Granted this is not the same case volume vrs jug size as a 50mm saw but it liked a bit more bd.

Who doesn't like a little more "blow" ?

 

[Redfin]

Who doesn't like a little more "blow" ?

Now Angelica dont forget the down.

Sorry man, Keith had me laughing the other day.

 

[TJ the Chainsaw Mechanic]

Well in between half a million interruptions at work today(Stinkin customers!) I was able to get that Polaris 570 going today. What would normally take 2 hours took 5 because I couldn't be left alone. But it runs and drives like a top....which is abnormal for a polaris.

 

[awol]

The one I traded Awol was 180 or something like that on a new piston.

Ummmmm, yeah. It's a bit more than that now.

 

[mdavlee]

Ummmmm, yeah. It's a bit more than that now.

I bet. You get around to cutting the base and squish on it?

 

[awol]

Yeah. I took it to the races in Willow but never did run it. It didn't respond to more compression like the older 80/801/90 saws do.

 

[mdavlee]

It had plenty for a 54mm bore already.

 

[Brewz]

I put my rat rod 064 back on the bench this afternoon. It was doing odd things randomly and slowly getting worse.
If I held it at 1/3 throttle it would cough like the fuel was turning on and off.

I could not get a carb kit for the BING carb so it was first on the list to check.

Put the NIB Walbro WJ10A that I bought predicting the BING may not live forever on the saw and the problem is gone.

While I had the air filter off I decided to do a bit of porting on the filter mount plate to help streamline the airflow into the carb.

I didn't make the opening bigger, just removed a lot of stuff in the way

 

[Brewz]

I cant wait to get the 064 out into some timber to see how it runs now with a new carb that works properly!!!

 

[Brewz]

Its amazing how well a filthy saw thawas recovered from the tip can come up with a bit of effort, degreaser and a pressure cleaner
Muffler mod and re-spray in hi temp black done, piston transfer removed from cylinder
Just waiting on parts now.











Did I mention I hate working on clamshells

 

[exSW]

And I'm still really not there yet clean wise.

 

[Brewz]

View attachment 36702 View attachment 36703

And I'm still really not there yet clean wise.

I was going to say you missed a bit

 

[exSW]

I was going to say you missed a bit

Smartarse. I need a bigger USC.