What's on your bench?

[WillG]

Got an ICS ductile iron pipe saw running, just took new fuel to get it going. Going to service it with a new plug and fuel filter and clean the air filter. He also brought me another one to get running and service.

Quickly looked at a 660 Magnum that seems to have a leaning out issue. Going to test the fuel system tomorrow evening and find someone to help me with doing a pressure/vac test.

Sent from my E6910 using Tapatalk

 

[av8or3]

Sharpening up a chain for the Dolmar in the background

 

[RI Chevy]

Wow. Quite the contraption there just to sharpen a chain. Lol

 

[MustangMike]

Wait ... he had a contraption .... I don't think I took my eyes off of the wall!!!!

Very nice!

 

[av8or3]

Aslo… had this mixed this week for the 116si in the photo as well as a few others that need touching up.
That is legal right? Touching up??

 

[Ronie]

Cylinder for my 371K conversion is about finished up.

 

[WillG]

1948 Evinrude Lightfour 9.7 hp. 4 cylinder horizontally opposed. Bought at an antique outboard motor club swap meet today. Added fuel, got it running and did some carb adjustment.

Sent from my E6910 using Tapatalk

 

[av8or3]

1948 Evinrude Lightfour 9.7 hp. 4 cylinder horizontally opposed. Bought at an antique outboard motor club swap meet today. Added fuel, got it running and did some carb adjustment.

Sent from my E6910 using Tapatalk

Very cool.

 

[qurotro]

Cylinder for my 371K conversion is about finished up.

View attachment 330945 View attachment 330946 View attachment 330947

371K won't take x torq cylinder. They are OE cases.

 

[Ronie]

371K won't take x torq cylinder. They are OE cases.

You can use a x torq cylinder on an OE case as long as you cut the cylinder flange or clearance the case.

 

[Ronie]

Pretty much done with the 371 x troq, just waiting on an o ring and starter decal. I did put some grease on the bushing and fire it up so at least I know it runs. I'm not sure if I'm going to leave the black tank and filter cover on it.

 

[RI Chevy]

Looks good Ronie. Different.

 

[av8or3]

Looks like a Sachs-Dolmar ???

 

[Ronie]

Looks good Ronie. Different.

Thanks, I think I'm going to put a black top cover I have on it.

 

[WillG]

660 Mag that owner complained of poor running. Tested fuel system and found vent working properly so decided to do a visual inspection on the fuel line/filter and found it "gummy" feeling. Was removing for inspection and it broke apart.

Sent from my E6910 using Tapatalk

 

[Maintenance Chief]

660 Mag that owner complained of poor running. Tested fuel system and found vent working properly so decided to do a visual inspection on the fuel line/filter and found it "gummy" feeling. Was removing for inspection and it broke apart.

Sent from my E6910 using Tapatalk

Good lord! I've seen them get brittle and hard. Whats he using for fuel?

 

[WillG]

I'm not sure.

Sent from my E6910 using Tapatalk

 

[RI Chevy]

He must be running bio-ethanol fuel. Lol

 

[sawboy]

Just finished with my 394. New bearings, 395 top end and intake conversion. Onto the jred 920 i need to put together.

 

[Mastermind]