What's on your bench?

[merc_man]

Google cobra pull cords. They are alluminum and come in all kinds of colors.
I am gonna order four more but differant colors

Sent from my SM-G950W using Tapatalk

 

[Maintenance Chief]

New pull cord handle. I really like them so may order a few more for some saws and one for my boat motor

Sent from my SM-G950W using Tapatalk

Your audience is less than impressed with your silly handle!
I was looking at those but was concerned about the actual comfort of using one on a high compression saw.

 

[merc_man]

Google cobra pull cords. They are alluminum and come in all kinds of colors.
I am gonna order four more but differant colors

Sent from my SM-G950W using Tapatalk

Here is the next ones i wanna get. May try some of ther pull cord too. It has a lifetime guarante

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Your audience is less than impressed with your silly handle!
I was looking at those but was concerned about the actual comfort of using one on a high compression saw.

I really like the feel of these. They are liter and bigher then stihl stock handles. They also make the bigger loop style handle

My girl was doing school work lol. I noticed the way she was afyer the pic and thought the same.
Sent from my SM-G950W using Tapatalk

 

[huskihl]

I really like the feel of these. They are liter and bigher then stihl stock handles. They also make the bigger loop style handle

My girl was doing school work lol. I noticed the way she was afyer the pic and thought the same.
Sent from my SM-G950W using Tapatalk

Ugggh, Dad? Really!!!??? Gaaaawd


Been there. They talk about the terrible 2’s. My daughter had the terrible 2-17’s.

 

[northwest saws]

Here is the next ones i wanna get. May try some of ther pull cord too. It has a lifetime guarante

Sent from my SM-G950W using Tapatalk

I really liked the cobra cord I picked up awhile back. It was a little more spendy than the normal stuff but it's super tough.

Sent from my SM-N970U using Tapatalk

 

[Boomer2230]

Neighbor brought over his spacing saw for me to take a look at.View attachment 327519

So apparently the shop that did the tune up on the spacing saw, forgot to install the gas lane onto the carb after cleaning. Easy fix....

 

[drf256]

Finally found a muffler that rivals the 361. The 064 muffler.

The baffle is both spot welded and brazed in with brass. Some spot welds are under the baffle, so a spot weld cutter can’t access them. The design of the baffle won’t allow widening of the inlet to the muffler unless it’s removed. Thank god for tig welders and SiBr filler.

What a PITA. Sheesh.

 

[drf256]

 

[RI Chevy]

Nice job Al. Harder than the port job. Lol

 

[merc_man]

Question for the pros. Stihl dont normally have a carb intake gasket if i remember corect?
Got the saw i bit ago and just going through the carb for a iratic itle.

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Question for the pros. Stihl dont normally have a carb intake gasket if i remember corect?
Got the saw i bit ago and just going through the carb for a iratic itle.

Sent from my SM-G950W using Tapatalk

Its a 034

Sent from my SM-G950W using Tapatalk

 

[Johnmn]

Its a 034

Sent from my SM-G950W using Tapatalk

Yes I believe there is a gasket between the intake and carb

 

[RI Chevy]

Yes I believe they use a gasket.

 

[merc_man]

Thanks fellas

Sent from my SM-G950W using Tapatalk

 

[WillG]

A little upgrade to the Tecumseh OHSK70 on my Ariens 724E, carb bowl with a drain valve. New bowl gasket and bowl nut/main jet gasket too.

Sent from my E6910 using Tapatalk

 

[drf256]

Question for the pros. Stihl dont normally have a carb intake gasket if i remember corect?
Got the saw i bit ago and just going through the carb for a iratic itle.

Sent from my SM-G950W using Tapatalk

Don’t use gasket. The oem seal kits came with a gasket, I believe the very early ones did use one, but I’ve never taken an 1125 series apart and found one installed from the factory.

 

[farminkarman]

Finished cleaning up that ms362 jug and got the ok to do some mods. Here are the stock numbers:

Squish w/ gasket: 0.035”
Ex: 100
Pr Trans: 129
Sec Trans: 135
In: 70

I gotta see where the exhaust lands after machine work, but I am hoping to hit the following numbers:

Ex: 103
Pr Trans: 126
Sec Trans: 129
In: 74

My dealer said he doesn’t like loud saws, so I am gonna be somewhat limited on the muffler mod. As a result, I am going to stay conservative on everything…just hoping to make it run better than stock.

 

[Ronie]

Got a wide clutch cover in the mail today and one of the nubs for the deflector was broke off so I drilled and tapped it for a m6 bolt, good as new.

 

[rogue60]

Worn out low compression..hmmm should have used a better oil lol