What's on your bench?

[Mastermind]

https://www.steahlyoffroad.com/kawasaki-kx-250-05-09-motorcycle-flywheel-weight-624

Might not be correct year Randy but it'll get you to the right page. These really tame the hit and add traction and lugability. Highest recommendation from an actual user.

The Bubba has been riding a dirt bike of one type or another since he was about 8 years old. I sorta hate to tame the beast.

Just love the little fukker.....

 

[Backtroller]

Good catch brother! You usually don't notice that until it's all the way gone!

Got lucky. It probably would have broken in 12” of snow half way up the driveway. It’s the drive belt idler.

 

[PA Dan]

Got lucky. It probably would have broken in 12” of snow half way up the driveway. It’s the drive belt idler.

In -2° weather...

 

[RI Chevy]

I looked at the photo. How could you tell the idler was bad? Play at the bearing?

 

[Agent Smith]

I looked at the photo. How could you tell the idler was bad? Play at the bearing?

He's talking about the spring thats about to rip through the bracket

 

[RI Chevy]

Ahhh. OK. I saw that too. But I kept looking to the bearing. Lol
TY sir

 

[WillG]

Snowblower done. New carb and added a fuel valve. Muffler was full of oil so it smoked like Bob Marley on initial startup. Let it run a bit and it cleared up. Let it run to temperature then changed the oil. Just want to run it tomorrow to make sure it's 100% good. Brought his Exmark Commercial 30 in the shop to work on tomorrow.

Yamaha golf cart got picked up, was a good money maker and cleared up some good space for other equipment.

Sent from my E6910 using Tapatalk

 

[Tpagel]

Doing trigger work on 300 Blackout

Sent from my moto x4 using Tapatalk

 

[bigbadbob]

This seems to be a common reply Thanks.

Can it be welded,, can you fab one up??
Anyways,, good luck,,looks like unobtainium,,

 

[WillG]

Kawasaki FJ180V KAI on an Exmark Commercial 30. Getting a new carb and throttle link spring. Throttle link spring is on order.

Possibly have a generator coming in for a get running before the snow storm.

Sent from my E6910 using Tapatalk

 

[Agent Smith]

Kawasaki FJ180V KAI on an Exmark Commercial 30. Getting a new carb and throttle link spring. Throttle link spring is on order.

Possibly have a generator coming in for a get running before the snow storm.

Sent from my E6910 using Tapatalk

You must have a different group of people near you Will because around here, if you tell somebody they need to buy a $15 carb kit for something, they lose their minds! Doesn't matter if its a cheap piece of equipment or an expensive piece, they want you to fix it and supply parts for $5 and they still act like you just made millions. Looks like you're doing good though with your side business. Good for you

 

[WillG]

You must have a different group of people near you Will because around here, if you tell somebody they need to buy a $15 carb kit for something, they lose their minds! Doesn't matter if its a cheap piece of equipment or an expensive piece, they want you to fix it and supply parts for $5 and they still act like you just made millions. Looks like you're doing good though with your side business. Good for you

The guy disassembled it himself and bought the new carb. The spring cost me less than $10 and he'll happily pay for whatever it needs. Side business is going very well. Thanks man.

Sent from my E6910 using Tapatalk

 

[WillG]

Honeywell 5500 watt generator no start. There's your problem lady! Needs a new carb, choke shaft is broken and choke plate is loose. Luckily a new carb is $30 on Amazon.

Sent from my E6910 using Tapatalk

 

[WillG]

Buddy's KFX 50. His kids haven't ridden it in a while so he's decided to sell it. This afternoon we got it running. Carb got a hot bath in the ultrasonic cleaner and the tank and fuel line got drained. Fresh fuel, new battery and then running sweet! He just needs to reinstall the plastics and clean it up a bit.

Sent from my E6910 using Tapatalk

 

[Slumberjack]

Husky 266/272 boudin stuffed revision 2 coming up soon lol

 

[Stevetheboatguy]

View attachment 280583 View attachment 280584 Husky 266/272 boudin stuffed revision 2 coming up soon lol

Soooo....... That lamp...... It a 20hp OMC (johnson evinrude)?



Steven

 

[Slumberjack]

Soooo....... That lamp...... It a 20hp OMC (johnson evinrude)?



Steven

Good eye on the cross flow pistons but it’s a 35hp I’ve been known to make those fly!

 

[Slumberjack]

Good eye on the cross flow pistons but it’s a 35hp I’ve been known to make those fly!

Yam 25 for the win though after I port both

 

[Slumberjack]

Really nice builder low use. Tight bearings crank case is holding oil and not leaking out of the seals. Should make a great quick build to slap a ported 272 cylinder on.

 

[dustinwilt68]

Been looking for a saw for trail riding in my jeep, picked this up yesterday, carb cleaned and new fuel line, fired right up. Gonna decide between this and a ms250 to keep.