What's on your bench?

[67L36Driver]

That's an extremely tidy 670 Kevin!

U betcha! [emoji7]

 

[JohnnyBlade]

Oooof....

View attachment 255770 View attachment 255771 View attachment 255772

@Roadfxr

DIBZ!!! Man that is a nice saw!

 

[Johnmn]

DIBZ!!! Man that is a nice saw!

I probably should have kept that one!

 

[JohnnyBlade]

I probably should have kept that one!

Lol! Is that the NOS'ish 625?

 

[Johnmn]

Lol! Is that the NOS'ish 625?

Nope just a clean 670 I once had

 

[JohnnyBlade]

Nope just a clean 670 I once had

Ahh well, u seem to find the Jreds up wer ur at. Im sure ull find another

 

[Johnmn]

Ahh well, u seem to find the Jreds up wer ur at. Im sure ull find another

Already have

 

[JohnnyBlade]

Already have

I knew it! LMAO!

 

[MustangMike]

So the tree guy who owns the burned up MS880 stopped by today and asked about me building an Asian 660 for him. I told him I planned to fix his burned up 880 first. He told me he never uses the 880, please built the 660 first!!!

 

[WillG]

Homelite blower back together and tested/tuned. Checked out the Husqvarna trimmer and determined that it wasn't worth repair, I'm thinking dirt ingestion killed it. Got my new valve spring compressor to disassemble the Generac cylinder head tomorrow.

Sent from my E6910 using Tapatalk

 

[Onan18]

Homelite blower back together and tested/tuned. Checked out the Husqvarna trimmer and determined that it wasn't worth repair, I'm thinking dirt ingestion killed it. Got my new valve spring compressor to disassemble the Generac cylinder head tomorrow.

Sent from my E6910 using Tapatalk

May want to check before you condemn it. IIRC a piston and cylinder is hilariously cheap for that unit.

 

[WillG]

Already talked with him and he is just going to buy a new trimmer.

Sent from my E6910 using Tapatalk

 

[Onan18]

Fair enough, I did a similar one this past winter. It was a bike handle version and the guy really liked it with a blade. Best I remember the top end was less than $80.00 from Husqvarna.

 

[WillG]

Fair enough, I did a similar one this past winter. It was a bike handle version and the guy really liked it with a blade. Best I remember the top end was less than $80.00 from Husqvarna.

Not bad at all. I'll save it in the pile of stuff to go through over the winter. Have a few trimmers I have been gifted that I might fix up and get a few bucks for.

Sent from my E6910 using Tapatalk

 

[WillG]

Last job last night was this MS170 sporting a massive 12" bar in for a recoil rope and running issue, ordered a new carb and got the rope replaced. Craftsman generator was dropped off for an oil leak that I suspect is the rear main seal. If it is I will refer him to the local generator repair place as I don't get into taking the generator portion of generators apart.

Sent from my E6910 using Tapatalk

 

[Stevetheboatguy]

Houston we have a problem..... Dag gum Yamaha's





Steven

 

[Stevetheboatguy]

Last job last night was this MS170 sporting a massive 12" bar in for a recoil rope and running issue, ordered a new carb and got the rope replaced. Craftsman generator was dropped off for an oil leak that I suspect is the rear main seal. If it is I will refer him to the local generator repair place as I don't get into taking the generator portion of generators apart.

Sent from my E6910 using Tapatalk

Did you order a 250 carb or stick with the 170?


Steven

 

[RI Chevy]

Send it to @srcarr52 he'll fix it. Lol

 

[WillG]

Did you order a 250 carb or stick with the 170?


Steven

Stock 170 carb. OEM was $40 on eBay

Sent from my E6910 using Tapatalk

 

[Stevetheboatguy]

Send it to @scarr he'll fix it. Lol

This one is aluminum. I can tig it if I wanted to. Not going to bother a used block is a better option if they want it fixed.

Steven