What's on your bench?

[295 tramp]

good looking finish.
I can't wait to get the s-10 parts from Mike

 

[PA Dan]

Oh those are yours! They should look great!

 

[295 tramp]

Those are Definitive Daves. I'm just building it for him.

 

[PA Dan]

Ya that's right!

 

[Nitehawk55]

Just got in an 046 my tree service guy wants fixed . Clutch side bearing went , particles sucked into cyl so it needs a complete rebuild .
Crank shaft is fine , new Hyway big bore 54mm kit on the way plus Caber rings from HLS .

 

[exSW]

Cub Cadet wouldn't start. Couldn't bypass it,wouldn't even click. Replace the solenoid. Ok,now it clicks,once. Start wiggling wires,nada. Reach around the shroud to the starter. Wiggle wiggle wiggle. Appears the the guy that installed the Magnum 18 (not me) didn't reef down the starter bolts none to well. It starts right up now. Start circuit,operative word is circuit.

 

[TJ the Chainsaw Mechanic]

You husky lovers are gonna hate this:

I gotta Husky 543Xp with an air leak from the factory. Brand new and not even one tank through yet.

 

[VinceGU05]

It's too big for my bench so it's on my floor. A new 56" 30" and 20" GB bars [emoji16]

 

[Brewz]

Where do you get your GB's from Vince?

 

[Nitehawk55]

Cub Cadet wouldn't start. Couldn't bypass it,wouldn't even click. Replace the solenoid. Ok,now it clicks,once. Start wiggling wires,nada. Reach around the shroud to the starter. Wiggle wiggle wiggle. Appears the the guy that installed the Magnum 18 (not me) didn't reef down the starter bolts none to well. It starts right up now. Start circuit,operative word is circuit.

Nothing like a reach around to set things right

 

[VinceGU05]

Where do you get your GB's from Vince?

GB direct

 

[Brewz]

GB direct

Ha ha
I thought you would say that.

Do you need a business account with them?
I have never seen where to buy them on the website.

 

[Simondo]

You husky lovers are gonna hate this:

I gotta Husky 543Xp with an air leak from the factory. Brand new and not even one tank through yet.

Some would say that isnt a Husqvarna ...made by Zenoah so i understand . Poor standard of construction never the less TJ !!

 

[VinceGU05]

Ha ha
I thought you would say that.

Do you need a business account with them?
I have never seen where to buy them on the website.

No.

Just ring them dude[emoji12]

Or most chainsaw dealers would resell their stuff along with Jakmax etc

 

[Onan18]

You husky lovers are gonna hate this:

I gotta Husky 543Xp with an air leak from the factory. Brand new and not even one tank through yet.

Meh, it happens, ad my grandfather used to say, "It's man-made, ANYTHING can go wrong." When I worked for a Stihl dealer we had two or three come out of the box that wouldn't even start. Anything can happen with any brand.

 

[Redfin]

It's too big for my bench so it's on my floor. A new 56" 30" and 20" GB bars [emoji16]

That 50" goin on your 2100? Im kickin around buying a big bar.

 

[TJ the Chainsaw Mechanic]

Meh, it happens, ad my grandfather used to say, "It's man-made, ANYTHING can go wrong." When I worked for a Stihl dealer we had two or three come out of the box that wouldn't even start. Anything can happen with any brand.

I hear ya. We're not a husky dealer so I don't know to much about that brand as far as flaws. haha But we are a stihl and echo dealer. I've had more issues with brand new echos than any other brand. No problems with stihls yet. Accept when people run straight gas in them. haha

 

[VinceGU05]

That 50" goin on your 2100? Im kickin around buying a big bar.

No it's for the 090 next to it and/or the 084

 

[Redfin]

Absolutely nothing. Waiting on some parts so I gave it a good cleaning this morn before work.

 

[rattler]

Sent from my XT1060 using Tapatalk