''Twas the night before the SOLMAR!

[Simondo]

True dat.....



No sir. I have something else in mind.

Such a Tease... !

 

[Miller Mod Saws]

You could always cut the edges of the piston flat to match the squish band, and leave a dome in the center to keep it thick enough.

The whole inside of the piston is on a dome. But would that work very well with the combustion chamber off to one side? All possibilities we'll see how she turns out. Lol.

 

[Deets066]

You gunna leave the limited coil in it carl?

 

[Miller Mod Saws]

Here's the hair cut I was talking about. Shortened the fins up some so the top cover would go on better. The muffler is actually proving to be more of a pain. Lol.

 

[Miller Mod Saws]

You gunna leave the limited coil in it carl?

I am for now. Got a couple 272xp coils laying here if need be. On the 7900 series. I dislike the 12800 coil as it's to hard to tune the saw. But the 13500 is just enough more rpm it allows for you to tune it better. And I've put a 13500 on this saw for now.

 

[Deets066]

Here's the hair cut I was talking about. Shortened the fins up some so the top cover would go on better. The muffler is actually proving to be more of a pain. Lol. View attachment 41702

I was gunna ask about the muffler too...

Is it a 665 muffler?

 

[Miller Mod Saws]

Ok guys. Ya can't have Christmas without some suspense. I did run the saw today. And brought it home and changed it. I will slip it back together tomorrow and take a vid.

So look at the pic and see if ya can guess the 2 things I changed! I apologize it's hard to tell. The pic is kinda crappy.

@Mastermind

 

[Deets066]

Ok guys. Ya can't have Christmas without some suspense. I did run the saw today. And brought it home and changed it. I will slip it back together tomorrow and take a vid.

So look at the pic and see if ya can guess the 2 things I changed! I apologize it's hard to tell. The pic is kinda crappy.

@Mastermind

Tapered the squish

 

[Miller Mod Saws]

I was gunna ask about the muffler too...

Is it a 665 muffler?

No 6400. I'll snap a quick pic. Being raised up it hits the cover. Lol.

 

[Miller Mod Saws]

Tapered the squish

Nothing to do with the squish band.

 

[Mastermind]

I'm thinking Deets nailed it. You cut the squish to match the piston. And....you raised the hell out of the exhaust.

 

[Deets066]

Nothingvtobdonwith the squish band.

Raised ex ?

 

[Mastermind]

Nothingvtobdonwith the squish band.

Whale chit

 

[Deets066]

Whale chit

Looked more tapered to me but I guess not

 

[Miller Mod Saws]

I'm thinking Deets nailed it. You cut the squish to match the piston. And....you raised the hell out of the exhaust.

lol. I had already did that.

 

[Deets066]

I'm thinking Deets nailed it. You cut the squish to match the piston. And....you raised the hell out of the exhaust.

We was thinkin the same chit

 

[Miller Mod Saws]

Looked more tapered to me but I guess not

Just the angle of the pic. Seriously didn't touch the squish band. Lol. That is past what I already had.

 

[Deets066]

lol. I had already did that.

Nothin else in the pic but squish band and ex.

Your cheating

 

[Miller Mod Saws]

Nothin else in the pic but squish band and ex.

Your cheating

Not cheating. I swear it's just hard to tell with my crappy pic. Here's last nights pic.

 

[Mastermind]

I don't know.