SELLING Saw purge

[5155]

I have not seen an outer and did not know they were made. Learn something all the time.

 

[cuinrearview]

394XP crank, wrist pins, bearings, and c-clips.
$75 plus the ride.
Crank fits other saws as well 281/288 ?

View attachment 333967 View attachment 333968

@davidwyby

 

[huskihl]

@davidwyby

394 crank won’t work in his 395. Unless he has the 394 flywheel as well

 

[cuinrearview]

394 crank won’t work in his 395. Unless he has the 394 flywheel as well

That's good info because I'd mentioned a crank from a carcass I have and I'm not sure which 4/5 of the scale it is.

 

[huskihl]

That's good info because I'd mentioned a crank from a carcass I have and I'm not sure which 4/5 of the scale it is.

394 crank has square ends on the key way cutout. 395 has rounded ends for the cast key

 

[David Young]

394 crank won’t work in his 395. Unless he has the 394 flywheel as well

I have a 394 fw for him. @davidwyby

 

[davidwyby]

My 395 flywheel is pretty beat. The coil came loose so it’s chewed up and missing some bits of fins.

 

[Fruecrue]

My 395 flywheel is pretty beat. The coil came loose so it’s chewed up and missing some bits of fins.

Damn huskys

 

[Fruecrue]

See first post for updated pricing on saws.
Open to reasonable offers on all.

 

[JohnnyBlade]

@JohnnyBlade

View attachment 333810 View attachment 333811 View attachment 333812 View attachment 333813 View attachment 333814

OMG!!!! And a full wrap to boot! I cant, im not going to, i probably shouldn't, lets give it a few days
Somebody buy this thing or take the pictures down or something, killing me over here
Good price too! And a 034 super head? Im gonna go throw up now............

 

[Fruecrue]

OMG!!!! And a full wrap to boot! I cant, im not going to, i probably shouldn't, lets give it a few days
Somebody buy this thing or take the pictures down or something, killing me over here
Good price too! And a 034 super head? Im gonna go throw up now............

It’s just money, and she’ll forgive you eventually.

 

[David Young]

It’s just money, and she’ll forgive you eventually.

Or he.
This is a non judgment zone Johnnyblade you are safe here.

 

[timg]

Damn Nick, Thought you would be all over these two pieces like a hungry kid with a Hershey bar with almonds. They won't be on the table for long.

 

[Mastermind]

394 crank has square ends on the key way cutout. 395 has rounded ends for the cast key

Clutch threads are different too maybe? Can't remember for sure.

 

[Stump Shot]

Clutch threads are different too maybe? Can't remember for sure.

I believe those should be the same, the flywheel nut could be a different story if I'm thinking of the right thing here.

 

[Mastermind]

I believe those should be the same, the flywheel nut could be a different story if I'm thinking of the right thing here.

Flywheel nut is different for sure. For some reason I thought the clutches were too. Course VS fine.

 

[Stump Shot]

Flywheel nut is different for sure. For some reason I thought the clutches were too. Course VS fine.

Upon looking at the IPL's it is quite plausible that's the case. 394 clutch is the exact same as a 288(76MM) 503701504(originally 503701501) . The 395 takes clutch 503701502 . They both use spring 503145101 .
There also was a 82MM "Jungle" clutch available for the 394 as a side note.

 

[Stump Shot]

Upon looking at the IPL's it is quite plausible that's the case. 394 clutch is the exact same as a 288(76MM) 503701504(originally 503701501) . The 395 takes clutch 503701502 . They both use spring 503145101 .
There also was a 82MM "Jungle" clutch available for the 394 as a side note.

Yet the plot thickens, if you order a Hyway clutch it fits all these - Husqvarna 181, 281, 288, 390, 394, 395.
https://www.hlsproparts.com/Husqvarna-181-281-288-390-394-395-clutch-p/h37288.htm

 

[JohnnyBlade]

Or he.
This is a non judgment zone Johnnyblade you are safe here.

LMAO!!!

Damn Nick, Thought you would be all over these two pieces like a hungry kid with a Hershey bar with almonds. They won't be on the table for long.

Im tellin ya Tim, some good parts fo sho!
I got a super head squirreled away already, and have a nice 272/with full wrap too. But that dont mean i aint itchin Im gonna sit back in the shadows a lil and let some other fine folks have their chance. But they better not take too long, i get jumpy sometimes

 

[Stump Shot]

Yet the plot thickens, if you order a Hyway clutch it fits all these - Husqvarna 181, 281, 288, 390, 394, 395.
https://www.hlsproparts.com/Husqvarna-181-281-288-390-394-395-clutch-p/h37288.htm

...while another AM clutch says it fits these alone - Husqvarna K1250, K1260, 3120K, 394 XP, 3120 XP
https://www.hlsproparts.com/product-p/h37125.htm