The Swap Meet Thread

[DSS]

I know Rob, goes by Jockeydeuce on the forums, has 288 stuff. I just got some from him

 

[huskihl]

Looking for a functional tank handle for an 024 or 026.

 

[Toad22t]

Rob is a good guy to deal with. Otherwise I believe most of those parts that you mentioned Dave are all still available OEM!

 

[dall]

Looking for a functional tank handle for an 024 or 026.

i can take care of that for you husk

 

[Genius]

Looking for a functional tank handle for an 024 or 026.

I've got a bit of 024 and 026 stuff Kevin. Lemme know if you end up running stuck

 

[huskihl]

Will do. Dallas has me covered I believe. If I need something else, I'll get it in a few weeks

 

[Onan18]

Dave,

I don't know about the full wraps, but I know for a fact the half wraps are still available new and are surprisingly affordable. I bought one for my 288 a while back, pretty sure it was under $40.00 retail.

Joe

 

[Mastermind]

I am going to have a Husqvarna 288 built as a cant saw very soon.
I have had the majority of the parts for a few months and bought a few of them i needed from Spike60.
I got the message my appointment is fast approaching and I printed off an IPL and realized I am missing a few bits yet.
I have the clutch cover/brake assembly and muffler on the way from my way, way, way far east satellite office

I need a coil and wiring I have kill switch and flywheel but thought I could get a coil aftermarket but I was wrong.
I want an unlimited coil if such exists.

I need what looks like some type of buffer/grommet for the top cover.
View attachment 28677

I need a fuel line if it is something special, I have bulk tygon and Echo fuel line if it is a standard size.
I need a top handle - I assumed I could get one from China but no luck.
I see Bryce has a full wrap for about $80 if anyone has feedback on if it is decent or not.
I also need what looks like a needle or something on the clutch side of the tank handle

View attachment 28678


finally I need two different grommets for the top rear deck of the cases
View attachment 28679


I have feelers out with a few guys but need to get my ducks in a row on this, as I have been dragging my feet and it needs to head out to the builder ASAP.
I have cash and parts and spare square cookies, I can even trade risqué pictures of chainsaws in compromising situations if that is your thing

Oh and nobody tell Randy I am sending him this please
View attachment 28680

Oh Lawd. I see now......


Listen.....don't stress over the date. I'm never on time doing them, so if you are late sending it, then we are even. Cool?

 

[Definitive Dave]

Deadlines keep me on track otherwise my slackitude runs wild and I never get anything done
Gonna run the crankcase and other used parts in the ultrasonic tomorrow.
Bearings feel good but I am sending new ones along inn case you disagree.

 

[Onan18]

Does anyone have the air filter holder and rubber grommet that seals to the air box for a Husqvarna 261/262XP? I need them for a 257 to 262XP conversion, have greenbacks to trade.

Thanks,
Joe

 

[jacob j.]

Deadlines keep me on track otherwise my slackitude runs wild and I never get anything done
Gonna run the crankcase and other used parts in the ultrasonic tomorrow.
Bearings feel good but I am sending new ones along inn case you disagree.

Always put new bearings in a saw that's going to be modified unless it's a new/near new saw or had a recent rebuild.

 

[Mastermind]

Hey fellers......

I need a decent clutch cover/chain break for a 262XP.

 

[jacob j.]

Hey fellers......

I need a decent clutch cover/chain break for a 262XP.

I think I got one, metal version.

 

[Mastermind]

I think I got one, metal version.

Heck JJ. I just found one. lol

 

[Jon1212]

Heck JJ. I just found one. lol

Was it behind the Poulan 5200?

 

[Mastermind]

Yeah, it sorta was. The 5200 is sitting in the floor in front of the bench, and there was a saw behind it with the cover I needed. When I have some spare money, I'll send it to Utah.

 

[Jon1212]

Yeah, it sorta was. The 5200 is sitting in the floor in front of the bench, and there was a saw behind it with the cover I needed. When I have some spare money, I'll send it to Utah.

No worries. When I have some spare scratch I'll send you that other reel of chain.

 

[ny15]

I am going to have a Husqvarna 288 built as a cant saw very soon.
I have had the majority of the parts for a few months and bought a few of them i needed from Spike60.
I got the message my appointment is fast approaching and I printed off an IPL and realized I am missing a few bits yet.
I have the clutch cover/brake assembly and muffler on the way from my way, way, way far east satellite office

I need a coil and wiring I have kill switch and flywheel but thought I could get a coil aftermarket but I was wrong.
I want an unlimited coil if such exists.

I need what looks like some type of buffer/grommet for the top cover.
View attachment 28677

I need a fuel line if it is something special, I have bulk tygon and Echo fuel line if it is a standard size.
I need a top handle - I assumed I could get one from China but no luck.
I see Bryce has a full wrap for about $80 if anyone has feedback on if it is decent or not.
I also need what looks like a needle or something on the clutch side of the tank handle

View attachment 28678


finally I need two different grommets for the top rear deck of the cases
View attachment 28679


I have feelers out with a few guys but need to get my ducks in a row on this, as I have been dragging my feet and it needs to head out to the builder ASAP.
I have cash and parts and spare square cookies, I can even trade risqué pictures of chainsaws in compromising situations if that is your thing

Oh and nobody tell Randy I am sending him this please
View attachment 28680

I have the majority of what you need

 

[Wagnerwerks]

I have 2 024 bottom ends, cases not split, and a few husky 50 bottoms here I need to move along. If you're in need, let me know. Trades or cheap.

I also have piles of s25da parts and saws. If anyone needs any of that, same deal.

Edit. Adding some things...

Mac timberwolf 3.4 engine. Ran well, but not a perfect specimen.

Lots of mac 700 parts and a whole saw.

 

[GCJenks204]

I am looking for a couple of clutch covers. 1 each for an 044 and an MS660. Likely easiest to trade cash but I do have an 1125 (036) clutch cover and an 1128 (MS461) with outer spike that don't match the saws that they came on...