The Angelo "C" MS440

[drf256]

Added 4* and mounted the dual port cover.

I plan to test with the DP and closed front in the am to see what made a difference.

 

[Deets066]

I'm interested to see how it gained Al

 

[Mastermind]

 

[MustangMike]

What filter are you running? I like dp covers, but the HD-2 filter made a bigger difference on my saw than the muffler.

 

[drf256]

What filter are you running? I like dp covers, but the HD-2 filter made a bigger difference on my saw than the muffler.

AM HD Mike.

Getting a wisdom tooth pulled in an hour. General anesthesia.

When I get home with all of those residual drugs in me, I plan on playing with chainsaws and operating heavy equipment-my skidsteer attachments coming today.

Hope to have all 3-4 videos up by 2pm. Gonna do with and without air filter as well.

 

[junkman]

What filter are you running? I like dp covers, but the HD-2 filter made a bigger difference on my saw than the muffler.

I bet it made the most difference because you were replacing a used filter plugged up with fuel spitback over the new one ?

 

[drf256]

Here ya go guys.

8 pin 3/8 RS 20"

Saw went from 14,600 to 15,100 at the same carb settting.

First Vid is closed front cover and no air filter.

Second, added airfilter and rpm jumped to 15,300.

Third, added DP muffler cover to saw with 3 piece air filter. Was turning 15,600.

I believe it was 4 stroking all along, but please correct me if I'm wrong.

I think 14,800 would be a safe wood cutting tune.

 

[angelo c]

Here ya go guys.

Saw went from 14,800 to 15,100 at the same carb settting.

First Vid is closed front cover and no air filter.

Second, added airfilter and rpm jumped to 15,300.

Third, added DP muffler cover to saw with 3 piece air filter. Was turning 15,600.

I believe it was 4 stroking all along, but please correct me if I'm wrong.

I think 14,800 would be a safe wood cutting tune.

Wow.
just.

WOW.

(and all that with an 8pin)

 

[paragonbuilder]

Looks much better Doc! Can't wait to run it...


Sent from my iPhone using Tapatalk

 

[drf256]

Yes. Deets was on the money here.

 

[Deets066]

78 sounds real good on that saw Al

 

[MustangMike]

Brian, you are likely right, and the old filter was a 3 layer.

 

[stihl_head1982]

Here ya go guys.

8 pin 3/8 RS 20"

Saw went from 14,800 to 15,100 at the same carb settting.

First Vid is closed front cover and no air filter.

Second, added airfilter and rpm jumped to 15,300.

Third, added DP muffler cover to saw with 3 piece air filter. Was turning 15,600.

I believe it was 4 stroking all along, but please correct me if I'm wrong.

I think 14,800 would be a safe wood cutting tune.

Very impressive.

 

[Deets066]

44/440 are an awesome saw, somthin about em just works when they are ported.

I take the 44 and 64 every time I cut

 

[Definitive Dave]

Adding an air filter made it run faster, holy crap my brain is battered.
That saw is running the Preakness for sure.
Did you run the filter with all three pieces or some other combo?
Faster with a filter....the sky may be falling

 

[dall]

looks good al

 

[paragonbuilder]

Adding an air filter made it run faster, holy crap my brain is battered.
That saw is running the Preakness for sure.
Did you run the filter with all three pieces or some other combo?
Faster with a filter....the sky may be falling

It's crazy. Restrict the intake, restrict the exhaust and gain... Why are we porting???
Lol

 

[Mastermind]

Looking real good doc....

 

[huskihl]

I noticed in some of the dyno charts that, without an air filter, hp #'so went up, but torque went down. Add an air filter, torque went back up. Something to ponder, I suppose.

 

[panteliss]

I just finished a 440 for my brutha form another mutha Angelo. I really couldn't listen to him anymore. Kept saying he just liked cutting with a Husky 372 because this saw just wasn't fun.

This saw should be fun @angelo c

I'll try to run it today, after work and if the rain ever stops.

#weneedmorebuildthreads (I don't even have a facebook/twitter account)

I hope that you charge him double money