The Angelo "C" MS440

[drf256]

I just finished a 440 for my brutha form another mutha Angelo. I really couldn't listen to him anymore. Kept saying he just liked cutting with a Husky 372 because this saw just wasn't fun.

This saw should be fun @angelo c

I'll try to run it today, after work and if the rain ever stops.

#weneedmorebuildthreads (I don't even have a facebook/twitter account)

 

[drf256]

Here's some stock pics

 

[drf256]

Cutting .028 off base

 

[drf256]

Cutting the band.

Took .022 out

Squish came out perfect at .020.

 

[drf256]

Having my way with the ports

 

[drf256]

 

[drf256]

Everyone knows that the @Red97 deflector is what adds the whoopass to any build. Used some coarse stainless screen on this one.

 

[drf256]

 

[drf256]

 

[drf256]

So, for you number guys, these are the stats.

Stock squish was .026 with the load of carbon on the piston and chamber. Stock compression was 160ish.

Took .028 from base and .022 from chamber and yielded .020 squish with the OEM .020 gasket.

Took .020 off the flywheel key.

Compression on assembly with very lightly oiled rings was 185. My saws usually have the exact same compression after the rings seat as is is after assembly with the lightly oiled rings as above. Very happy with this number.

Final numbers are 101/118/74

Hope to cut some wood later. Will post vid of its maiden voyage-if the rain stops.

Then the NWP 026 build begins.

 

[jmssaws]

I like every single thing about it al,did you try anything new?
You port work is very nice and clean

I bet it's a runner,good job my freind

 

[drf256]

Morning J

Thank you.

If only it was an EFCO

 

[jmssaws]

Morning J

Thank you.

If only it was an EFCO

Morning

 

[Mattyo]

Morning

 

[jmssaws]

Morning J

Thank you.

If only it was an EFCO

Porting saws or people today?

 

[drf256]

Porting saws or people today?

Boeuf

 

[drf256]

Morning

Hi MATTY

 

[Brush Ape]

Morning Gents,

Having my way with the ports

I thought them rubber gloves had an ulterior (posterior) purpose.....

 

[Brush Ape]

Porting saws or people today?

Gee whiz we give the East Coasters an hour head start and they still can't get one rubbed off.

 

[jmssaws]

I'm off to scar the armada,might do a thread today if it goes well.