So what did you do today?

[hacskaroly]

Got it on FleaBay - https://www.ebay.com/itm/174110254930?var=472980105073

Nice, that will come in handy!!

 

[Jusgunn3]

It feels pretty good as well! I ordered some more to have on hand to repair some older handles, just clean the handle good before you install it.

Nice, that will come in handy!!

 

[furb]

Finished splitting and shuffling vehicles and trailers to get this back to the wood shed. Lost my mind trying to figure out why my splitter wouldn’t pull over. I dropped the lift with the engine off and the handle never reset.

 

[ammoaddict]

More Helene cleanup.

 

[Agent Smith]

Wanted to put a little bump in the truck as the factory sound system is straight out of 1950. New Pioneer front and rear door speakers. Single 12" sub. Amp turned all the way down and this thing hits way too hard for my old ass. Sub technology has apparently come a long way in 20 yrs since i last messed with this crap. 12's didn't hit this hard back in my 20's. I got too carried away with this operation

 

[furb]

Wanted to put a little bump in the truck as the factory sound system is straight out of 1950. New Pioneer front and rear door speakers. Single 12" sub. Amp turned all the way down and this thing hits way too hard for my old ass. Sub technology has apparently come a long way in 20 yrs since i last messed with this crap. 12's didn't hit this hard back in my 20's. I got too carried away with this operation
View attachment 457066View attachment 457067I’m that old I had jl w0s and a kenwood with the animated display. I’m getting some new stuff for my Sierra after my kicker speakers quit after a few years. Stuff doesn’t last anymore

 

[Al Smith]

One thing after another that didn't go so good .Attempting to move 20-25 tons of usable scrap iron the old Fergusen TO 20 .made in 1950 gave me fits .It had sat for about a year and half and the freakin tank probabley had some gunk in it blocked the fuel .That done it's got a Midwest lift that should have been on a larger tractor .Trying to lift the entire front axle from a dump truck it nearly stalled tractor engine .Come to find out I stuck the forks under a root of a tree .how dumb is that .Got it moved and blowed a hydraulic line which is probabley as old as the tractor .That grunt snagged to the root finished it off . Rain today I'll get back at it on Monday .That loader has a Vickers vane pump I had rebuilt,new vanes seals etc .It's certainly putting out the pressure for being 75 years old .

 

[Wilhelm]

Lets just say I won't be running into the low chicken coop door frame no more!

Before


After

 

[Bill G]

Wanted to put a little bump in the truck as the factory sound system is straight out of 1950. New Pioneer front and rear door speakers. Single 12" sub. Amp turned all the way down and this thing hits way too hard for my old ass. Sub technology has apparently come a long way in 20 yrs since i last messed with this crap. 12's didn't hit this hard back in my 20's. I got too carried away with this operation
View attachment 457066View attachment 457067

The kids used to say "if it's too loud your too old"

I have always been too old.

 

[Partner]

I'm musical too it's a pity that you're losing your hearing

 

[Wilhelm]

"Hey pal, got 5 minutes to help me fix something?"

2 hours later we got some issues remedied but had to wrap up knowing we need to still address some mayor issues at another day.

 

[hacskaroly]

"Hey pal, got 5 minutes to help me fix something?"

Is that a Dolmar tractor??

 

[Hinerman]

Well, I finally got some new material on the 2100CD handle. Came out ok for the first time trying the heat shrink stuff.

Good looking saw!

 

[Wilhelm]

Is that a Dolmar tractor??

Yes....

.... no, MF clone.

 

[Bill G]

The MF was a clone of the Ford........never as popular as the Ford but had a OHV engine.

 

[Partner]

I got a second Chinese mower, so I thought that two of them might turn out to be functional A large 200cc engine plus a bad muffler makes a lot of noise you need to reduce the revs

 

[Wilhelm]

Had some fun with my new inverter welder.
This tiny thing sure can lay a bead without shutting down once.

 

[Partner]

It welds much better than with the old transformer, but the duty cycle is small even though it is the largest 230V welder

 

[sixonetonoffun]

Took two to make one.





Turned out ok. Had to grind off 3 nuts. I'm gonna call that a win.





Should be good for a couple more years with luck.

 

[Outback]

Your Furboss looks unimpressed.