Show off your muffler mods

[merc_man]

Made another Neighbor Waker Upper 9000 for a little husqvarna 350
View attachment 328472 View attachment 328473

I like that. I want to try makin one similar to it.

Sent from my SM-G950W using Tapatalk

 

[Canadian farm boy]

395xp muffler.

 

[huskihl]

Melt $4 worth of silver solder and grind $2 worth back off

 

[PA Dan]

Melt $4 worth of silver solder and grind $2 worth back off

View attachment 328862 View attachment 328863

Well how's it sound? How does it compare to the ones that have an outlet on the other side that needs the top cover trimmed?

 

[huskihl]

Well how's it sound? How does it compare to the ones that have an outlet on the other side that needs the top cover trimmed?

Didn’t run it yet. I’ve got 2 boxes full of 394/5 carcasses but apparently no effing muffler nuts

 

[Red97]

Well how's it sound? How does it compare to the ones that have an outlet on the other side that needs the top cover trimmed?

Loud

 

[Ronie]

Redmax G3800

 

[Benwa]

I like that. I want to try makin one similar to it.

You need to! This was a stock saw with no other changes aside from the muffler swap. It picked up 9 seconds in the cut.

 

[Boomer2230]

Made another Neighbor Waker Upper 9000 for a little husqvarna 350
View attachment 328472 View attachment 328473

Are you selling these?

 

[Benwa]

Are you selling these?

I don't. They're fairly time consuming. I just make them for personal saws at this point.

 

[Boomer2230]

I don't. They're fairly time consuming. I just make them for personal saws at this point.

Do you have detailed pics of how you made it? If I have pictures I could probably make one here. Looks like a fun project

 

[Vintage Engine Repairs]

 

[Ketchup]

I kind of like the patina/rust look. Interesting to see how much hotter the bottom of the weld got when I ran it.



After black Ceracoat. Considering the spikes I should have put the second pipe higher.

 

[Dolkitafreak]

View attachment 329339
I kind of like the patina/rust look. Interesting to see how much hotter the bottom of the weld got when I ran it.

View attachment 329340

After black Ceracoat. Considering the spikes I should have put the second pipe higher.

Easy fix, take off the oversized dumb spikes! I’m afraid I’ll never understand, even in softwood they’re excessive lol

 

[Ketchup]

Easy fix, take off the oversized dumb spikes! I’m afraid I’ll never understand, even in softwood they’re excessive lol

We do a lot of large cottonwood. 4” deep bark and near horizontal root flares. I agree they’re over the top for the average tree and downright dangerous for climbing. I wish they were retractable.

 

[Woodslasher]

We do a lot of large cottonwood. 4” deep bark and near horizontal root flares. I agree they’re over the top for the average tree and downright dangerous for climbing. I wish they were retractable.

Like these?

 

[qurotro]

Too loud..

 

[Ketchup]

Too loud..

The pipes go in about 1”. It’s not the loudest saw I’ve run. Shifting the outlets back and to the side really helps. I have a 2172 with a 1-3/4” outlet in the front. THAT one is loud. I did this muffler up to swap in. Gotta re-paint it though. It’s got some chinesium finish that my primer doesn’t stick to.

 

[huskyboy]

 

[RI Chevy]

Nice!