more jms

[hseII]

"I never liked red armor, some of the worst saws I've seen inside of are ones ran on red armor". For the record I'm not making up that statement.

Made by who?

 

[Onan18]

"I never liked red armor, some of the worst saws I've seen inside of are ones ran on red armor". For the record I'm not making up that statement.

Who said that???

 

[huskyboy]

@huskyboy Mason I think the crank will be ok, pull the seals and flush out the crankcase real well, clean up the Jug, new meteor 395 piston and a new set of seals and run her.

I'm liking this idea. The bearings are feeling great after a few flushes. The first few flushes the mix was pretty dirty so at least I know it's working. I smoothed those scars on crank with 320 grit and inspected carefully. Seems to be ok.

 

[huskyboy]

Made by who?

Who said that???

Stratton

 

[Onan18]

Stratton

Go figure.

 

[Lightning Performance]

I'm liking this idea. The bearings are feeling great after a few flushes. The first few flushes the mix was pretty dirty so at least I know it's working. I smoothed those scars on crank with 320 grit and inspected carefully. Seems to be ok.

Bout time you got your head back in the game.

 

[Mastermind]

Stratton

You mean Strap-On.

 

[huskyboy]

Seem ok what you guys think? The gas mix was filthy coming out of it but rinsed until the mix was clear. Also discovered the flywheel was advanced .050 set it back to stock.

 

[Lightning Performance]

IMHO NOPE seems tight and dry and loud. Just my worthless 2ct.

 

[huskihl]

Dallas's?

DDave's

 

[dall]

Mine was out about 10 about half as bad as Dave's

 

[Lightning Performance]

Did you "set" the crank on this saw yet??? Just askin'...

Edit: Mason @huskyboy

 

[p61 western]

Seem ok what you guys think? The gas mix was filthy coming out of it but rinsed until the mix was clear. Also discovered the flywheel was advanced .050 set it back to stock.

I would just go ahead and change the bearings and seals. It will Give you a better peace of mind.

 

[huskyboy]

Did you "set" the crank on this saw yet??? Just askin'...

Edit: Mason @huskyboy

Don't know what that means? Center it?

 

[p61 western]

Don't know what that means? Center it?

I think that's what he meant.

 

[Lightning Performance]

Don't know what that means? Center it?

Chicken Dinner

 

[huskyboy]

I'm gonna go ahead and for piece of mind change seals and bearings. *f-word it

 

[BrokenSVT]

I would just go ahead and change the bearings and seals. It will Give you a better piece of mind.

I'm gonna go ahead and for piece of mind change seals and bearings. *f-word it

"Piece of mind" is what you give someone when you're pissed at them.

"Peace of mind" is what you have when something good happens.

Thereby, change your bearings and seals for peace of mind, and save a piece of your mind for Jason.

 

[p61 western]

"Piece of mind" is what you give someone when you're pissed at them.

"Peace of mind" is what you have when something good happens.

Thereby, change your bearing and seals for peace of mind, and save a piece of your mind for Jason.

Lmao I fixed it for ya Jon.

 

[p61 western]

I'm gonna go ahead and for piece of mind change seals and bearings. *f-word it

It just makes more sense, and when your done you know it's right.