Brewz
Free Range Human in a Tax Farm
- Local time
- 12:19 PM
- User ID
- 550
- Joined
- Jan 16, 2016
- Messages
- 4,217
- Reaction score
- 14,304
- Location
- Hunter Valley - Australia
Howdy folks.
Last weekend, I picked up 3 x 084 saws.
One is a runner, 2 are rebuilders.
One of them is special.... a bit like me
I am starting this thread to keep it updated on the rebuild and also in the hope that someone on here may be able to recognize the work to assist me with tracking down who built it.
Its very well built, and has done bugger all.
Speaking with @Postrip tonight, he said it has a 3120 piston. The piston looks to be free porting on one side at the bottom right of the exhaust port and something has gone through the top end so Id say something has gone wrong.
Otherwise, it loos nice.
It has some numbers stamped into the front of the cylinder that I will get a photo of tomorrow
Pipe has been braised together, cylinder porting looks VERY tidy.
transfer bridges are no longer.
Intake has been welded up and has a modified HG2 (I think from memory?) carb fitted, not a HT tilly.
It has a very intricate hand made throttle arrangement that may lend some clues to the builder
Last weekend, I picked up 3 x 084 saws.
One is a runner, 2 are rebuilders.
One of them is special.... a bit like me
I am starting this thread to keep it updated on the rebuild and also in the hope that someone on here may be able to recognize the work to assist me with tracking down who built it.
Its very well built, and has done bugger all.
Speaking with @Postrip tonight, he said it has a 3120 piston. The piston looks to be free porting on one side at the bottom right of the exhaust port and something has gone through the top end so Id say something has gone wrong.
Otherwise, it loos nice.
It has some numbers stamped into the front of the cylinder that I will get a photo of tomorrow
Pipe has been braised together, cylinder porting looks VERY tidy.
transfer bridges are no longer.
Intake has been welded up and has a modified HG2 (I think from memory?) carb fitted, not a HT tilly.
It has a very intricate hand made throttle arrangement that may lend some clues to the builder